6 Attachment(s)
TC/ABS unit with control module
To remove
1. Detach and move aside the main fuse box.
Attachment 5413
2. Unplug the connector and move it aside.
Attachment 5414
3. Unscrew the brake line unions and plug the holes.
4. Undo the two nuts securing the unit to the bracket.
5. Lift up the unit.
To fit
Attachment 5415
1. Lift the hydraulic unit into position, taking care not to damage the pipes.
2. Fit the two nuts.
Tightening torque 20 Nm (14.8 lbf ft)
3. Remove the plugs and reconnect the brake pipes. Fit the brake-pipe nipples (rear pipes first) finger tight and then tighten with a spanner.
4. Plug in the connector.
5. Fit the main fuse box in place.
Attachment 5416
Parts
Attachment 5417
Attachment 5418