Group buy - Short-Shifter for c900
Hi all, I`m copying what was announced in saabcentral.com recently. maybe there`s someone interested over here. please let me know.
--------------------------
So ladies and gents,
Having heard interest expressed on getting a short-shifter for c900
with this I would like to propose a GROUP BUY on the following short-shifter:
- Produced in the EU.
- tried and tested. I`ve been using them in my cars already for some 3 years with no sign of fatigue. It`s been made for and sent to SAAB nuts in Belgium, Holland, France, Latvia, USA and I have not heard anyone coming back with an issue (hope sombody from SC members with my shifter might come in and say what they think of it)
- Steel shaft, solid steel spherical bearing (as compared to plastic from SaabSavior), aluminium bearing housing, adjustable aluminium lower ball.
- Plug`n`play. Ready to drop in and drive off.
- Stock length, minus 2 cm or any specific length possible (your choice).
Provides:
- shorter travel shifts (let me check but shifter top end moves ~ twice shorter distance that stock. Let mer check once again)
- much more precise that your original and already worn SAAB shifter
- shockproof design, no plastic part present, should last forever under normal use
- lower sitting shifter knob if you choose shorter version (I know many people complain of stock shifter sitting to high)
- no more palstic cup/springloaded intallation manevring, just drop in and turn 3 screws
- reverse lockout functionality is retained and you`ll just need to transer wire, spring and pin from the original SAAB shifter
- original black plastic lockout lift piece and original knob fits right on, so from outsider it looks plain stock (apart from length)
- written installation instructions accompany every shifter, it takes some 20-30 minutes to get it in, adjusted and ready.
One thing to note - as this shifter (and the same goes for SAAB Savior and Erikkson shifters) uses steel spherical bearing, it`s not fixed agains turning. This in reality mean that you`ll be able to turn the shifter clock/anti-clock if you want, you may find it off the perfect position occasionally. The gaiter will keep it more or less straight. Rubber gaiter better that leather. Honestly, this is no issue for me (using this shifter in two of mine c900) but I want make it clear so people are aware. Again, this is the same for any short-shifter of this design.
Normal price is 160$ (or equivalent in other currency). If I do get a group of 10-15 we go down to 155$, 15-20 we go down to 150$ + shipping to US (and CAN) 25$, will check Europe and other parts of the world if there is anyone interested. I guess I would ask for a downpayment on my PayPal beforehand as I need to buy material and be sure that I do make the shifter which will be bought and won`t stay on my shelf.
Please, let your name down replying here or send an e-mail to KRBDxx at gmail
So, it looks like this. The shifter and type of bearing used.
http://saabworld.net/images/imported/2011/04/27.jpg
http://saabworld.net/images/imported/2011/04/28.jpg
http://saabworld.net/images/imported/2011/04/29.jpg