It could have been the size of file as the limit per day was set to 50Mb. I removed the restrictions so you should be able to download now.
Printable View
It could have been the size of file as the limit per day was set to 50Mb. I removed the restrictions so you should be able to download now.
Thank you, it works now :)! I scanned your file also and it gets the same results. You are using it 3 years now so I assume it has to be a false alarm. Thank you again for your help!
Hi
I have used this program for years - also after updating my WIN to 10.
Suddenly today I got this:
Attachment 17407
Answering myself:
Needs to be run as Administrator.
To turn on "run as administrator" always:
Right click on the shortcut -> Click on Open File Search Path -> Right click again and open Properties -> open tab Compatibility and check the box next to Run as administrator -> OK
Is it some update that Windows has done?
Anyone having problems with the "Fault code search" not working? For NG 9-3 I can choose ECU, but not faultcode. For 9-5 I can't chooce ECU, ECM is dimmed.
This is so fantastic. The WIS was the last reason keeping me from upgrading an old computer to Windows 10. I had been running a Windows XP emulator in Windows 7 for many years.
Thank you so much for this!
Dave Frerking
There seems to be a lot of missing images in my installation on Win 10. I was looking at the 2001 9-5 and it seemed like more pictures showed up as boxes with an "x" in them than had pictures. I did check some other models which seemed to be missing far fewer images but were still missing quite a few. So I just wanted to check if that might be a problem with something I did or if that's just how this WIS works. Thanks.
I can tell you I have installed this on 2 Windows 10 computers and it worked perfectly both times. It may be something in your display settings?
I had already tried uninstalling and re-installing but I can certainly try it on another PC.
Honestly I have not gone through enough of it to see how extensive the problem is. First I looked through the 9-3 section and that seemed to be complete. But when I went to use it for the starter motor on my 2001 9-5 wagon it seems to be missing a lot of the pictures, especially under the fault diagnosis area. I see you also have a 2001 9-5 wagon. Have you tried using it for that?