I have a 1986 Saab 900S. Just got it a week ago. Been having problems with my turn signals. First, there were no signals at all. No hazards. Put in a brand new flasher and it worked great. Half a day later, whenever I used signals, all the indicators would blink, as if the hazards were on. Hazards worked fine. So I replaced all the bulbs. No fix. I thought it might have something to do with the switch. Not realizing the mess I was making I unplugged all the wires off the switch. Well now I realize each of those wires goes to a specific prong. So now I have two questions:
1) What color of wire goes in where? I have 7 prongs. Wire colors are white/brown, double blue/white, green, red/white, double red/white, gray, and purple/red. I found a couple layouts online but not have worked. I have tried these set ups:
pur/r | | bl/w double
br/wht | | gn
r/w --- gy --- / r/w double
and reversed it. I have also tried:
bl/wht pur/r
grn br/wht
gray double r/wht r/w
And then some random variations. When the r/w wire is in the bottom right spot I have brights. But that's all I've gotten.
2nd question. Once my switch is hooked up properly, what can I do to get the signals to work properly. Any input on my situation would be much appreciated!
Cory