5 Attachment(s)
Front hood/bonnet emblem removal and replacement - Saab 9-5
Tools needed:
- hair dryer (optional)
- screw driver or other flat blade tool
Parts and supplies needed:
- Saab front hood emblem part number 12844161
- Adhesive remover
Difficulty rating (scale 1 to 5):
1 - very easy. Anyone with some patience can do this.
Time estimate: 15 minutes
Instructions
Note: these instructions are very similar for the rear trunk or hatch emblem replacement.
The Saab emblems need to be replaced occasionally because the top part will come off eventually.
Attachment 8706
Protect the paint with tape or other material so you won't damage the paint. For best results, do this when the hood/bonnet and emblem are warm so the the adhesive will let go easier. Park the car in the sun for a while or use a hair dryer.
Be careful when you pry off the emblem, do not use excessive force because you can dent the area around the emblem.
Attachment 8707
There will be some of the old adhesive left after the old emblem is off. Make sure to clean everything off before you put on the new emblem. I used Goof Off with good results.
Attachment 8708
Take off the protective film of the new emblem and place emblem on the hood. It will self-center in the holes of the hood so it is very easy to do.
That's it. Your Saab will proudly display SAAB and the Griffin logo again
Attachment 8710
Attachment 8709