Search:

I would recommend these spark plugs, which works well in both summer and winter.
BCPR9ES-11
http://saabworld.net/images/imported/2015/02/5.jpg

Hi Frank. Unfortunately, one must use a Tech2 to remove the service message, otherwise it is just press the clear key when starting the car, after 20-30 starts, the message disappears. 9-3 and 9-5 up...

You can stop ding-dong noise by plugging in Tech II and disconnect the sound. I've done it with the key/door detector and seat belt warning at my local saab garage.

I was at my local Saab workshop and talked to them about this problem, and I got a solution to the problem.
There are connectors available at authorized workshops. The spare Nico need is 12788954 ,...

It's good that you've ordered an ignition cassette, then you can be calm and take out the fuse No 17 to remove the error code as well.
It's a good solid car that works great as long as you take...

Hey Nico, you need not be afraid that you have bought a Saab. On the contrary, you can be happy with it. Your error codes mean that your ignition cassette misfires at the start. This means you'll...

Here is some another sites for parts for your car.

webshop.saabparts.com Sweden
schwedenteile.de Germany
speedparts.se Sweden
hirsch-performance.ch

Welcome to this forum Jofa. Take care of your Saab 9-4x, only 814 cars built......... even if it´s a disguised GM ThetaEpsilonit it is a collector car. I think you will enjoy being a part of the...

I like this forum, you are doing a great job.:thumbsup:

Be careful when you use siliconspray and protect the upholstery, especially if it is leather upholstery. Put a towel under the belt, pull the belt completely and spray on, rub the product with cloth...

I hade some problems with my seat belts not retracting, but I used CRC silicone spray to clean and grease the belts and now they are like new.

Sounds like it´s time to change the turbo.

Check out this company in Sweden, they ship world wide. Bildelar, reservdelar, begagnade bildelar - Signalen AB

Good to know, thanks bro:thumbsup:

I hope you find what the problem was and let us know about it.:thumbsup: I have to change my bushings quite soon.

Might be the same problem that i have. Bad subframe bushings.

Washed and buffed during my vacation in Cornwall UK. Right price and it could be yours;-).

New pics as I promised. Late but here they are.:D
1022710228102291023010231

I agree as well, totally useless. :thumbsup:

Look at this, it might help.:) Soldering Guide

A cold solder looks gray and faded out while a good solder looks shiny and smooth. It's hard sometimes to see if a soldering is good or bad, then it is better to solder everything for safety.

The easy way is not always the best way;) Why not try to solve the problem my way. You might get surprised.:D

I've had the same problem as many others with alarm. I changed the batteries in the siren, it worked for 2 weeks then it started again. I switched to another siren ...... it worked for about a month,...

The problem lies not in bad batteries and capacitors, but cold soldering to the PCB. :D

Exellent, happy to help you.:thumbsup: