Welcome to the world of Saab ! Register

Search:

Type: Posts; User: East Tennessee USA

Search: Search took 0.25 seconds.

  1. Problem solved! The issue was caused by either...

    Problem solved! The issue was caused by either varnish buildup on the valve stems or deposits around the valve seats. I put a bottle of STP in the tank, and 4 oz. of Sea Foam in the oil. Then, ran...
  2. Thanks for all the replies. I haven't gotten a...

    Thanks for all the replies. I haven't gotten a chance to do much with it yet, but have been using the car every few days to help track the characteristics of it. Ambient temp has no effect. We've...
  3. intermittent loss of compression all cylinders

    I have a 1991 900s naturally aspirated with a 2.1. When you try to start it, it spins over so evenly that there can't possibly be any compression on any cylinder. It won't start, and the...
  4. Replies
    13
    Views
    1,876

    Thanks for the advice. I did get under the dash...

    Thanks for the advice. I did get under the dash and look at the pushrod. It would be hard to judge which booster to get without first pulling my existing abs unit out of the car for comparison. ...
  5. Replies
    13
    Views
    1,876

    Thanks for the info. I was stuck thinking of...

    Thanks for the info. I was stuck thinking of looking for a booster for an earlier model Saab, while I could have just went with something more common. Good call. First I'll find a booster that...
  6. Replies
    13
    Views
    1,876

    ABS Delete

    I have a 1991 Saab 900 S that I am interested in deleting the ABS system. I would like to eliminate the pump/accumulator system and replace it with a basic vaccuum booster and master cylender. I've...
  7. Replies
    6
    Views
    1,671

    Well, I finally set down to solder the suspected...

    Well, I finally set down to solder the suspected leg in the ecm circuit board, but wasn't able to do it because the space in there was just too small for me to do. I'll clarify what I was going to...
  8. Replies
    6
    Views
    1,671

    Hello! Sorry it's been so long, but I haven't...

    Hello! Sorry it's been so long, but I haven't been able to work on the car much lately. Spraying the injectors by manually providing power and ground proved the injectors weren't at fault. I was...
  9. Replies
    6
    Views
    1,671

    Thanks for the info. My controller has a...

    Thanks for the info. My controller has a Jetronic label on it. Bently publishers refers to my fuel injection system as Bosch LH2.4. I think the .6 DC volts is meant to be a ball park indicator for...
  10. Replies
    6
    Views
    1,671

    Weak injector pulse

    Hello! I've lurked here for a while, but now I might be able to use some advice. I bought a 1991 900s about a year ago with a bad knock in the engine. The engine ran at that time, and I drove it...
Results 1 to 10 of 10
All times are GMT. The time now is 15:07.
Powered by vBulletin® Version 4.2.5
Copyright © 2019 vBulletin Solutions Inc. All rights reserved.