Search:

I don't know if you would be interested or not. But I could make you up a used plug and send it to you for free. Just pay the shipping. The color of the wires would be wrong. But you could just...

Again. I don't know if the UK plug is the same as the U.S. version. So I'm not 100% sure what pins you will use.

But in the U.S. we use a 4 flat wire trailer plug. That being said I only used 4...

Did you order the pins that go in the plug?

It looks like just that one alignment pin is in the wrong place. Is that correct? Do you have the special crimpers?

Here's some reading for you.
...

I could be wrong, but I think the newer cars and ones from the UK are different.

Do you have the extra wiring harness in the spare tire compartment?

The smoking was from the exhaust being full of oil. I drilled holes in it and drained out a ton of oil. Still smoked for a long time. I swapped out the exhaust from a junkyard car. Smoking stopped.

After a lot of research I settled on a cassette adapter. I know you can add a jack by taking the radio apart. But you can still here funny sounds. Plus I have enough stuff tore apart all ready.
...

Here's the same thread with a little more info. Ya know. There's a guy selling these modules ready made plug and play,,,lol.

http://www.saabcentral.com/forums/showthread.php?t=611850

You must have missed this,,,lol. But you have to have special crimpers.

http://saabworld.net/showthread.php?t=32633

They recommended that one to me also. But couldn't say the one I chose wouldn't work. I just didn't want to deal with running a wire to the battery. Like you I thought about using that red wire. They...

I finally got a bit of a test run today. Drove around town for about a hour. No problems with the car or the SID acting funny. All though I can feel the draw bar jerking a little.

Between the...

Are you doing it from under the car? You need to remove the intake manifold brace. Then there's just one bolt I think. Might be two. Can't remember.

I finally got a hitch installed on my wagon. I went with the Draw-Tite 36286 class ll. I also made my own DIY taillight module that normally cost around $150. It's virtually the same thing. Just...

I appreciate your effort. But you're a day late,,,lol. I all ready placed the order with out getting a draw bar.

I was actually looking at your hitch install thread. I was going to use it for...

I'm about to pull the trigger on a draw-tite 36286 class ll hitch. I see that's what a lot of you are using.

So I need to figure out the rise or drop of the draw bar I should get. I'd like to...

Both mine and my Sons wagons have busted flex pipes between the cat and first muffler. Well those things aint cheap. But I am,,,lol.

So I hit all the local auto parts stores to see what I could...

I'm in the market for a small trailer to pull with my wagon. Something $500 or less. Just something big enough to haul a Goldwing motorcycle, or maybe even a couple of smaller bikes. I think I want...

Well I don't know what a hpt and lpt is. But I do know that I just did this swap.

I have a 02 95 wagon 2.3 with a Garret turbo. I put on a TDO4 turbo from a 2000 Areo wagon. Like mentioned. You...

Just curious of how old of a guy are you. I'm 55 and starting life over,,,lol.

And a 1-1/4"??

Old timers huh,,,,lol.

You're confusing me,,,lol.

According to your thread you say that is a class ll hitch. And when I pulled up that part number in your thread it is in fact a class ll with a 1-1/4" receiver.

Is...

Some were sold with the draw tite name, and some with the toe ready name.

I seen something on the net somewhere indicating they were both the same company.

I think I'm going to give them a call.

I must state this is just a theory right now as I have not completed the project to test it. But geez. It should work,,,lol.

Anyway. I've been reading about needing to use a trailer wiring module...

Just wondering if the OEM hitch for the wagon is any better than an after market.

I know some of you have used the draw-tite. But would you have installed an OEM if you could have found one.
...

I can't tell if it's coming from higher up, or getting slung up. But it's running down the pass side rear I think. It might be crankshaft seal getting slung up.

It's pretty bad. I think it's...