Push To TALK manual instructions.

[jlrSAAB]

Push To TALK manual instructions. Activating the system by voice control.
Interruption of the session by voice control.
requirements: Saab navigation system and DVD:




Introduction
With voice control, audio system and navigation system can be controlled using verbal instructions. Voice control has many advantages, but more importantly to reduce the causes of inattention to traffic.
To use the voice, you must have a full of maps DVD and navigation system in active mode.

Activating the system by voice control
The voice control system is activated by pressing the PTT button on the steering-wheel. The sound source is interrupted and you hear a signal to indicate that the system is ready to receive verbal instructions.
For security reasons, will continue to hear some sounds after being activated by voice control system.
The session was interrupted by voice control
Pressing the button once PTT.



PTT instructions
When issuing an oral instruction, look forward and speak clearly at normal speed. The oral instruction can be composed of a single word or several words followed.
After the tone indicating that the system is ready, you have 7 seconds to give an oral instruction.
If there is no oral instruction during the time that the system is listening, an instruction. If not indicated an oral instruction, the session is interrupted.
The voice control system is sensitive to individual accents, for example, different dialects and can not learn to understand different forms of pronunciation. The system displays the verbal instructions that do not know.

Alternative oral instructions
If the system is difficult to capture a spoken instruction, can be used oral instructions alternatives. Alternative instructions are written in brackets, for example Radio [select] [band] FM, meaning that you can choose to say or FM radio band to select FM Radio.

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

1.- Navigation, PTT instructions

Navigation select [Target] Navigation [Target]: With these launches a verbal instructions to a destination guide saved as a marker of voice TAG.
The system asks for a marker. Give a voice TAG marker.
If there is an active route, the system will become the marker of voice recorded on the final destination. If there is an active route marker voice is added to the route as a stop. In a way, you can add up to three stops.
To save a bookmark for voice, see page 55
Code:
See page 55.
Navigation Options
Press MENU to select the tab Nav for the following settings:
1.-Indication voice - Adjust the level of the voice guidance pointer and voice recognition.
2.-Edit addresses book:
. Add - View information on how to add an entry in the list of addresses.
. Edit / View - Add / View address book information.
*******************
1.-pointer Voice tag:
Adjust the level of voice guidance pointer and voice recognition.

Pointer voice prompt
Volume - Select + (plus sign) or - (minus) to adjust the level of pointers voice tag recognition.

2.-Add a voice tag marker
1 Select Edit / View.
2 Select Add label. Voice.
3 The system asks for a marker to record voice:
You have 4 seconds to save a bookmark.
The system repeats the recorded voice marker.
Navigation Help: Get help with verbal instructions for navigation.

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

2.-Screen, PTT instructions

With the help of the following oral instructions, you can adjust the screen.

Show [setting] [mode] day: The screen has always daytime settings.

Show [setting] [mode] night: The screen has always adjustments night.

Show [setting] [mode] auto: The settings of the display lights are changed automatically according to the environmental conditions.

screen HELP: Get help with verbal instructions for the screen.

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

3.- Radio, PTT instructions:
1 .- Radio: Turn on the radio.
2 .- Select frequency band:
Radio [select] [band] AM,
Radio [select] [band] FM.
3.-Select a radio frequency:
Radio [select] <frequency> [AM]
Radio [select] <frequency> [FM].
4 .- Radio help: Get help with verbal instructions to the radio.

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

4.-CD player, PTT instructions

The following instructions are used for oral compacts CD/MP3 discs.
- CD Disc: Active Player CD/MP3.
- CD Disc [select] <AND> track: Select a CD/MP3 track.
- CD Disc [selection] following folder: Go to the next folder of MP3 disc.
- CD Disc [select] previous folder: Go to the folder above the disk MP3.
- Disc CD Help: Get help with verbal instructions for the player CD/MP3.

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

5.-AUX, PTT instructions:
The following verbal instructions are available when you have a portable player connected to the AUX input.
AUX IN : Activate the portable player

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

6.- HELP for voice control :
Voice Support / Help: It helps you move forward at a meeting of voice control.
Cancel: interrupts a meeting to voice control.

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

comments:
The purpose of this post is to help users of the PTT.
-traveling in the dip foggy road I must take special care in monitoring the line of the road and I thought, why not give push to talk instructions, instead of manually losing the attention of the road?.
it was fun sometimes says bad command but follow the instructions to work perfectly.
it is very useful and a lot of fun.
over all security on the road.

[jlrSAAB]

requirements:
Saab navigation system + Bluetooth option


Bluetooth Phone Integration System Voice control -BPIS:

The voice control system means that BPIS (Blue-tooth Phone Integration System) can be controlled using verbal instructions.
Voice control has many advantages, but more importantly to reduce the causes of inattention to traffic.

Activation of the voice control system
The voice control system is activated with a press of the PTT button on the steering wheel.
It silenced the potential sources of sound on the screen and the text Voice SID ...
A tone indicates that the system is listening and ready to receive an oral instruction.
For security reasons, some noises will hear after activated by voice control system.
Also appear on the screen SID important safety messages.
The voice control session is interrupted once by pressing the PTT.

NOTE:
It is not possible to give an oral instruction during a conversation by telephone.
A push in the PTT during a telephone conversation disconnect or connect the phone's microphone.
The session was interrupted by voice control when receiving a call.
The voice control session is interrupted once by pressing the PTT.

Confirmation
To simplify the use of voice control, the system will constantly confirms the instructions provided.
The confirmations are transmitted by the sound equipment in the form of phrases and tones of aid.
To stop a confirmation and go directly to the following oral press CLR.

Volume level
The volume of aid and phrases tones of aid are in accordance with the volume control on the steering wheel or with the command VOL.

Voice Dialer
The phone number can be kept together with a marker of voice, for example, a name, to draw quickly.

Oral instructions:
The voice control system works best in a quiet environment.
The background sound for the system may hinder the collection of oral instructions.
Look forward and speak out clearly at a normal speed.
Oral instruction may consist of a word or words followed.
After the tone indicating that the system is ready, you have 7 seconds to give an oral instruction.
If there is no oral instruction during the time that the system is listening, an instruction.
If not indicated an oral instruction, the session is interrupted.

The voice control system is sensitive to individual accents, for example, different dialects and can not learn to understand different forms of pronunciation.
The system displays the verbal instructions that do not know.

General instructions:
These instructions are always available when connected to the voice control system, except when the system is expected to indicate a dial.

Oral instruction Explanation:
HELP.. ........Requests for further information at a meeting of voice dialing.
CANCEL ... End the meeting.

Numbers and characters
Read the digits of a phone in one or in groups, for example, of three numbers. If you make a mistake and uses the numbers of oral instruction CORRECT, the latest numbers indicated group is erased. The numbers are recorded and the characters shown on the screen of SID.
Oral instruction characters. O. ZERO numbers. 1-9 Figures 1-9. + PLUS.

Example of oral instruction:
To dial a number
1 .- Press the PTT.
Wait for the tone. !
2 .- Please call, wait a "name or number."
3 .- Provide NUMBER. Wait for "THE NUMBER, PLEASE."
The figures indicate the number of the phone number.
Say, for example zero, five, four "pause" two, seven, three "pause" EIGHT ONE, ONE. "
4 .- The system repeats the numbers recorded during breaks.
5 .- Say CALL.

Save a voice marker
Save the number with a marker i can call to voice quickly.
1 Press the PTT. Wait for the tone.
Give SAVE
2. Wait for "THE NAME, PLEASE."
3 Enter a marker of voice, for example, "Adam."
.........Wait for "NUMBER, PLEASE."
4 Enter the phone number.
.........The system repeats the number recorded.
5 Say SAVE.


Oral instruction. -Explanation
1 .- CALL:
The system asks for a name or phone number.
You can use the following verbal instructions:
NAME - To call a marker voice.
NUMBER - To specify a number.
Record phone number, for example, in groups of three figures.
After a record-number can be used the following verbal instructions:
. CORRECTED - Delete the last group of figures recorded.
. CLEAR - Clear all the figures recorded.
. CALL - Dial the number.

2 .- redial: call the last number dialed.

3 .- Save: Save the number with a marker to enable voice calls quickly.

4 .- Del: Delete a marker voice.
The system asks for the voice marker selected
Answer:
YES to confirm or
NO to stop.

Phone Book:
All markers voice read together with phone numbers to which they are linked.
During the break between the markers of voice, can be used the following verbal instructions:
. DELETE - Deletes a marker voice.
. CALL - Call a marker voice.
If a name in the phone-book is linked to a voice dial, the name instead of the phone number on the screen SID.

Note:
When asked to confirm with YES or NO after redial, SAVE, or DELETE CALL, telephone number indicated on the screen SID.
If the phone is stored in the phone-book, appear instead to the name that is linked to the number displayed.
The catalog of the voice control system is independent from the phone-book, so that the markings are not stored on the SIM card.