Anyone Interested in a 3" Downpipe for the 2.8t V6

[kanundrum]

Got a Custom 3" Downpipe and Midpipe made. The one from Ferrita is a Midpipe essentially as George from VIVA Performance told me same thing with the maptun since its the same piece as well.

Everything is still stock appearance no modifications under the hood and you can't really tell unless you start the car up cold or give it the beans.!

Cost would be from $400 to $600 where if you wanted both downpipe and midpipe it would be $900 to $1100

We need 25 People Interested (Anywhere in the world) all they would do is call in put a deposit down and then wait about a month to 1.5 months for the part to be manufactured.









Video: YouTube - Turbo X 3" Downpipe and Midpipe
Keep in mind that I have a Turbo X and the XWD Drive Train loss as well as This dyno is the all stock (No tuning) except for a K&N filter and I have both the downpipe and the midpipe.

Dyno Before:



Dyno After:



The shop that will be producing the product is

Called Ptuning. Performance Auto Parts Warehouse, Installation, and Dyno Tuning | PTUNING.COM (877-788-6464)

Been dealing with them for about 5 or 6 years now and I love their work.

It does Throw a CEL but its nothing a VTune Can't fix from what I hear.

Let me know

[CarbonFlash]

That's great you did all this and hope it works out. However the price is way too high IMHO. I'm sure a good muffler shop or good fabricator could do it for much less. Again nothing against your efforts and it looks great.

[kanundrum]

For both a downpipe and midpipe for $1000 is too much? I highly doubt that. Most euro applications are $1500 for downpipe and midpipe. Keeping in mind the complicated bends for the downpipe a shop would charge $1500 plus for both pieces.