Restructuring of the system. Replacing everything except the radio. The plans of two amplifiers, three-band front and a subwoofer. We start with the amplifiers. The owner refused to close the gap between the trunk and interior for the transport of long items. We will think how to organize the entire economy in the trunk.

We got
headunit Alpine IVA-W505R
speakers Morel Elate 6\3
amps Eton ECC500.4 ECC1200.D
sub Boston Acoustics G3-104

proceed

Reveal the shell luggage

and start working. Install the fasteners to be installed frame amplifier. On the left there is a niche staffing studs with thread left over from the amplifier. Use them!



This bracket will be screwed from the bottom frame

Saw off the wall in the amount of luggage


Amplifier will be mounted inside the frame on an S-shaped bracket

We continue to adjust the wall (see the top notch under the boot loop)

Close the gap between the wall of hardboard and then cover it filler, at the same time covering all the small cracks


That's the way it looks after grinding

Crossovers will also be posted on the wall

They will be fixed in the same way as the amplifier.








The wall is almost ready

Paint for protection against moisture







The right side is on the same principle







Fits wall carpets

Set the amplifiers and crossovers








Here's how it looks (not yet fixed!)



to be continued ...