Welcome to the world of Saab ! Register
Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25
  1. #21
    Ian Robinson
    Saab Fan ianrobbo's Avatar
    Join Date
    09 Mar 2011
    Location
    Sussex UK
    Posts
    16
    Saab(s)
    1989 c900 T16S T5
    Thumbs Up:   0
    Okay, it's easy to get confused at this point.

    The gap (and remember it's a gap - your drawing has it filled in not removed) has to be 20 slots from the CPS when the engine is at TDC. As your drawing shows it, your CPS is at TDC - I suspect that you don't have it mounted there. What you have marked as TDC is actually CPS position, i.e. CPS has to be there when the engine is at TDC.

    Clear as mud, right? It's 6 months or more since I did this, I hope I'm giving you the right info!

    Also, I think that this view is looking from the front of the engine to the rear of the car - in other words, if it was sat on the bench, you'd have to flip it over to fit it to the flywheel

    0 Not allowed!

  2. #22
    Saab Nut
    Join Date
    06 Mar 2011
    Location
    Westport, Pennsylvania, United States
    Posts
    410
    Saab(s)
    93 9000 CSE, 85 900T
    Thumbs Up:   1
    I get it will redraw sometime this evening.

    Do not have it mounted at all. Plant to put the cps in a similar location to where you located yours.
    View was assumed to be from crank shaft looking towards flywheel. Realized I did a filled gap after I posted the Pic Easy fix.

    Will also make a gauge that fits over the crank, aligns with TDC and locates the CPS. A simple laser cut piece of sheet metal.

    0 Not allowed!

  3. #23
    Saab Nut
    Join Date
    06 Mar 2011
    Location
    Westport, Pennsylvania, United States
    Posts
    410
    Saab(s)
    93 9000 CSE, 85 900T
    Thumbs Up:   1
    Looks like I am stuck till I get my motor back from the motor shop to my workshop.

    Need to have a fixed point of reference for the CPS mounting in it's relation to TDC before the slot can be located.

    Anyone know the angle or slot count from TDC to where the CPS is/could be located?

    0 Not allowed!

  4. #24
    Saab Nut
    Join Date
    06 Mar 2011
    Location
    Westport, Pennsylvania, United States
    Posts
    410
    Saab(s)
    93 9000 CSE, 85 900T
    Thumbs Up:   1
    This a bit better?

    Will need to wait for my motor to be back so I can place the VR sensor and reference it to TDC then reference the slot.
    Attached Images Attached Images  

    0 Not allowed!

  5. #25
    Ian Robinson
    Saab Fan ianrobbo's Avatar
    Join Date
    09 Mar 2011
    Location
    Sussex UK
    Posts
    16
    Saab(s)
    1989 c900 T16S T5
    Thumbs Up:   0
    Quote Originally Posted by jskrebs View Post
    This a bit better?
    Looking good


    Quote Originally Posted by jskrebs View Post
    Will need to wait for my motor to be back so I can place the VR sensor and reference it to TDC then reference the slot.
    The right thing to do - it's quite easy once you have it figured out in your head, and you have the engine in front of you.

    0 Not allowed!

 

 

Similar Threads

  1. Winter Tire Question
    By Aaron in forum Tech Talk
    Replies: 15
    Last Post: 09 November 2012, 07:08
  2. Why do spammers sign up and not post anything?
    By nordwulf in forum Administration
    Replies: 13
    Last Post: 01 January 2011, 04:50
  3. Serpentine belt change - long vs short belt
    By SaabScott in forum Saab 9-5 (1998-2009)
    Replies: 10
    Last Post: 10 December 2010, 05:40
  4. Fuel Supply line Check Valve Question
    By photousa in forum Saab 9-5 (1998-2009)
    Replies: 0
    Last Post: 15 November 2010, 01:44

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 11:03.
Powered by vBulletin® Version 4.2.5
Copyright © 2019 vBulletin Solutions Inc. All rights reserved.