Results 1 to 10 of 10
-
19 July 2011 #1
- Join Date
- 22 Apr 2011
- Location
- Tamaqua Pa USA
- Posts
- 7
- Saab(s)
- 72 Sonnett, 88, 900, 90, 9000, 99 9-5
Engine change
I am about to do an engine change in my 93 9-5. I am useing a low mi (under 80,000) 95 motor. I would like to use the auto trans too but am told it is too different.
Anything I should look for?
Thanks,
GEORGE!!
-
22 July 2011 #2
- Join Date
- 22 Apr 2011
- Location
- Tamaqua Pa USA
- Posts
- 7
- Saab(s)
- 72 Sonnett, 88, 900, 90, 9000, 99 9-5
4 cyl engine change
Next week I am going to swap engines in my 9-5 Gen 1 anything I should know that would help. I have a donor car I am pulling the motor out of.
-
22 July 2011 #3
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
There are instructions for powertrain removal in the Saab WIS. I can post those if it helps you out.
-
22 July 2011 #4
- Join Date
- 22 Apr 2011
- Location
- Tamaqua Pa USA
- Posts
- 7
- Saab(s)
- 72 Sonnett, 88, 900, 90, 9000, 99 9-5
Or point me to it. Thanks
GEORGE!!
-
22 July 2011 #5
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
Here it is: http://saabworld.net/attachments/f29...ation-1999-pdf
It can also be found on this page for future reference:
http://saabworld.net/f29/index-tutor...aab-9-5-a-261/
I think many would interested to hear any details so please report back. Good luck!
-
22 July 2011 #6
- Join Date
- 22 Apr 2011
- Location
- Tamaqua Pa USA
- Posts
- 7
- Saab(s)
- 72 Sonnett, 88, 900, 90, 9000, 99 9-5
I see that is for a std trans. Do you know if there is much difference in a auto? I was wondering if the frame came down. I see it is like GM and you drop it all out the bottom.
My flat rate book calls it for 5.5hrs. That appears to be a chore in and out that quick.
I'll keep all posted. I have the wrecked '93 to practice on. It is hit in the pass front so I may cut the corner off to get it out.
GEORGE!!
-
22 July 2011 #7
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
I thought it was for both transmissions as step 12 is for the manual and 13 is for the auto.
I would probably need 5.5 days (if not weeks) for a project like that.
-
22 July 2011 #8
- Join Date
- 21 Aug 2010
- Location
- Williamsburg, Va. and Cedar River Mi.
- Posts
- 638
- Saab(s)
- 01 95 Aero and Wagon, 09 93 Combi and an 08 95 Combi
Engine Change
They are both 5 speed automatics made by the same company. You should be allright
-
22 July 2011 #9
- Join Date
- 22 Apr 2011
- Location
- Tamaqua Pa USA
- Posts
- 7
- Saab(s)
- 72 Sonnett, 88, 900, 90, 9000, 99 9-5
the 99 looks like it is a 4 spd. auto. The yard says it is different.
-
22 July 2011 #10
Scott Hutchings Too much to do, no time!
- Join Date
- 30 Jul 2010
- Location
- Mississauga, Ontario
- Posts
- 418
- Saab(s)
- 2009 9-7X 5.3i
President, The Saab Club of Canada
www.SaabClub.ca
Similar Threads
-
Saab 9-5 engine air filter replacement/change
By nordwulf in forum Tutorials, repairs and serviceReplies: 11Last Post: 17 July 2014, 20:12 -
Saab 9-3 oil change instructions: 2.0t, 2.0T engine
By Dave T in forum TutorialsReplies: 14Last Post: 21 January 2014, 02:43 -
Has anyone done wheel bearing change on 9-5 as a DYI?
By Rajiv in forum Saab 9-5 (1998-2009)Replies: 5Last Post: 21 March 2011, 16:42 -
does your car run better after an oil change?
By aleki in forum Tech TalkReplies: 8Last Post: 16 March 2011, 18:54