0

Thumbs Up: |   0 |
Ever since Day 1 of the car I had the CEL Light of P0496 Come up and I finally fixed it, same exact instructions on fixing it as any 9-3 aero
Instructions can be found here:
"HOW TO" replace EVAP Purge Valve on 2.8T V6 - SaabCentral Forums
Also same exact part # as well
Thumbs Up: |   2 |
With the MAF that close to the air filter box I'd get worried about getting K&N oil all over it, so make sure you check it often and keep it clean. My buddy's Toyota Tacoma threw a CEL every month due to oil from a K&N on the MAF. He replaced the K&N with a regular filter and it never happened again.
I'm jealous that Weathertech makes the fitted mats for the 9-4x, as apparently they don't make them for the Gen I 9-5 anymore. Argh.
Now: '00 Saab 9-5 Aero Combi - '89 Peugeot 205 CTI - '91 Peugeot 309 GTI
Gone: '87 Saab 900i - '95 Saab 900 SE Turbo
Thumbs Up: |   0 |
Thumbs Up: |   0 |
I did get a CEL from thew K&N Filter so looks like that will have to go soon
Thumbs Up: |   0 |
Quite the Journey.
So the other day I get a Stabilatrak failure (Sucks they couldn't program the words Haldex Instead) and then get a Check Engine Light.
The CEL was found and it was for the MAF Sensor, apparently it either is dirty or it does not like the K&N Filter.
Dealer told me this so I will clean it one more time and see if it still doesn't like the K&N Filter and then put it back to stock if thats the case.
Next my battery was fine but then when I dropped it off at the dealership to clear the sunroof channel and a few other things it died at the dealership and has been dieing ever since. So now I need a new battery really odd it didn't happen before the dealership
The car really hates dead batteries like every other saab so time to replace that
Its def been a Journey
PS my warranty didn't cover most of the dealership work so had to pay out of pocketSigh
Thumbs Up: |   0 |
Did a Key Off draw test with the following results:
Looks like the draw is 8.0 amps (it ranged from 2 to 8 amps, the door was open) even with the door not open it still ranged from 2 to 8 amps and it stayed at 8amps
Here is the stock battery specs: http://www.oewarehouse.com/item.wws?...IONAL&weight=8
660 CCA
Capacity 80ah
Thinking about getting a Lifepo Battery
Chimera® | Lithium Ion Automotive Batteries
Thumbs Up: |   0 |
Some pics, repairing my wheel today by hand then going to plastidip them.
![]()
Thumbs Up: |   0 |
![]()
Anyone looking for a DIY on the battery Swap just use a screw driver (in the 2nd pic) and push outwards to get that tray off the stock battery.
PS. I did confirmed I have a 6amp parasitic drain somewhere
Thumbs Up: |   0 |
Teaser Pic
![]()
Thumbs Up: |   0 |