Results 1 to 2 of 2
-
23 October 2012 #1
- Join Date
- 23 Oct 2012
- Posts
- 1
- Saab(s)
- 2006 9-5
Question about the "aws 55-50" (the saab's tranny) and valve body
recently while i was driving in M mode on my 2006 9-5 my transmission jump and went into limp mode and i got the error p0743.
I bought the SOLENOID LOCK-UP, and with it the slt and sls solenoids. my transmission jumps from time to time when going from drive to reverse, thats why i decided to buy the other solenoids, that and they came as a set.
I have also been doing the drain an fill for my transmission fluid.
The Question:
since i am going to change the solenoid from the valve body is it also a good idea to clean the valve body itself?
would it be complicated?
does the valve body need to come off to clean it?
-
11 November 2012 #2
- Join Date
- 11 Nov 2012
- Location
- USA
- Posts
- 57
- Saab(s)
- 2003 9-5 Aero wagon
I guess you have fixed it by now but I wouldnt mess with the VB large can of worms if you misplace anything. Just replace the solenoids.and use the saab atf.
Similar Threads
-
1980 Enduro "Steroid Poppin Swede" exhaust and WIP video
By omaroo in forum Saab 900 (1979-1994)Replies: 1Last Post: 16 June 2012, 00:11 -
Turbo "S" - Water Injection installation instructions - Sept '88
By omaroo in forum TutorialsReplies: 25Last Post: 22 April 2012, 13:25 -
Article: Victor Muller at the "We are Saab" event in the Netherlands
By nordwulf in forum vBCms CommentsReplies: 4Last Post: 16 January 2012, 14:19 -
Article: One of several convoys in Seattle during international "We are Saab" weekend
By Dave T in forum vBCms CommentsReplies: 0Last Post: 15 January 2012, 04:25