Welcome to the world of Saab ! Register
Results 1 to 2 of 2
  1. #1
    Frank
    Administrator nordwulf's Avatar
    Join Date
    30 Jul 2010
    Location
    USA - Netherlands
    Posts
    7,740
    Saab(s)
    previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
    Thumbs Up:   101

    Front hood/bonnet emblem removal and replacement - Saab 9-5

    Tools needed:


    • hair dryer (optional)
    • screw driver or other flat blade tool


    Parts and supplies needed:


    • Saab front hood emblem part number 12844161
    • Adhesive remover


    Difficulty rating (scale 1 to 5):

    1 - very easy. Anyone with some patience can do this.

    Time estimate: 15 minutes

    Instructions

    Note: these instructions are very similar for the rear trunk or hatch emblem replacement.

    The Saab emblems need to be replaced occasionally because the top part will come off eventually.

    Name:  P1150691.jpg
Views: 4027
Size:  31.3 KB

    Protect the paint with tape or other material so you won't damage the paint. For best results, do this when the hood/bonnet and emblem are warm so the the adhesive will let go easier. Park the car in the sun for a while or use a hair dryer.

    Be careful when you pry off the emblem, do not use excessive force because you can dent the area around the emblem.

    Name:  P1150692.jpg
Views: 4037
Size:  22.1 KB

    There will be some of the old adhesive left after the old emblem is off. Make sure to clean everything off before you put on the new emblem. I used Goof Off with good results.

    Name:  P1150695.jpg
Views: 4105
Size:  20.3 KB

    Take off the protective film of the new emblem and place emblem on the hood. It will self-center in the holes of the hood so it is very easy to do.

    That's it. Your Saab will proudly display SAAB and the Griffin logo again

    Name:  P1150700.jpg
Views: 4384
Size:  35.3 KB

    Name:  P1150699.jpg
Views: 4025
Size:  31.8 KB

    0 Not allowed!

  2. #2
    Bruno
    Saab Addict swisssaabist's Avatar
    Join Date
    18 Nov 2016
    Location
    Cheeseland or TICTAC land
    Posts
    599
    Saab(s)
    9-5 ARC Wagon 2002 2 t auto engine B205E
    Thumbs Up:   56
    I would say if you don't have special products for removing old glue you can use simply petrol lamp liquid on a rag, don't forget to clean up the greasy let in on with rubbing alcohol, when it's dry, do your gluing.
    That's works for any stickers in fact.

    0 Not allowed!

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 07:33.
Powered by vBulletin® Version 4.2.5
Copyright © 2019 vBulletin Solutions Inc. All rights reserved.