Results 1 to 4 of 4
-
24 January 2013 #1Saab Fan
- Join Date
- 01 Jan 2013
- Location
- France
- Posts
- 11
- Saab(s)
- None yet but a 93 Biopower awaits
Help wiring in rear 6x9 with the OEM amp in the boot ?
Hi
I want to change the rear OEM speakers and add some 6X9 as the holes are their already. I want to also add a small amp to power them. How do I wire this new amp up to the rear amp that is in the boot already?
How do I also get the front dash speaker grills off ( i havent tried yet)
The car is a 2008 9-3.
-
27 January 2013 #2
Tim Schlose Saab Enthusiast
- Join Date
- 19 Mar 2011
- Location
- American Riveria
- Posts
- 167
- Saab(s)
- 2007 9,3 Aero S/C
-
27 January 2013 #3Saab Fan
- Join Date
- 01 Jan 2013
- Location
- France
- Posts
- 11
- Saab(s)
- None yet but a 93 Biopower awaits
Whooooaaaaa
Excellent thanks alot!!
-
01 August 2014 #4
- Join Date
- 01 Aug 2014
- Location
- SE
- Posts
- 2
- Saab(s)
- 9-3 -04 2,0t
How is the wiring done? I've installed 6x9 in mine. I've connected the 354R - AMP2 and I've wired the cables from H8-1 the grey connecter on rear shelf to the speakers, but I'm not sure what happens between these connectors, are they connected by default? I have the ES1-7: 150W Premium Sound System by default. The connector for AMP2 was already in the trunk along with optic cables.
I think I can see that there are 8 cabels in for the H8-1, and previously before I changed the wiring harness on the shelf, it was only 4 cables out from H8-1.Last edited by Kicken; 01 August 2014 at 19:42.
Reply With Quote
