Results 1 to 6 of 6
-
05 February 2013 #1
- Join Date
- 05 Feb 2013
- Location
- Finland
- Posts
- 3
- Saab(s)
- 9-5, 9-3, 99, 96
Question about vacuum lines
Can someone get me a diagram of the vacuum lines on a 9-5 2.3t. It's not idling right, and I suspect a vacuum lines are assembled wrong.
-
05 February 2013 #2
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
I have looked for a while but there doesn't seem to be a single vacuum diagram available.
-
05 February 2013 #3
Desmond Khoo Saab Enthusiast
- Join Date
- 24 Mar 2012
- Location
- Malaysia, Kuala Lumpur
- Posts
- 152
- Saab(s)
- 2006 9-5 2.0t
There was another thread about it here.
http://saabworld.net/f9/vacuum-hose-diagram-27711/
-
05 February 2013 #4
- Join Date
- 05 Feb 2013
- Location
- Finland
- Posts
- 3
- Saab(s)
- 9-5, 9-3, 99, 96
Not the AC lines. Lines from the bypass and so on
-
06 February 2013 #5
Desmond Khoo Saab Enthusiast
- Join Date
- 24 Mar 2012
- Location
- Malaysia, Kuala Lumpur
- Posts
- 152
- Saab(s)
- 2006 9-5 2.0t
sorry didn't realise it was referring to the wrong diagram.
googled it and found this
Saabnet.com: 9-5 BB Post: 9-5 Vacuum Line Diagram
Hope it's what you were looking for.
Sometimes rough idling could be a dirty throttle body.
-
07 February 2013 #6
- Join Date
- 05 Feb 2013
- Location
- Finland
- Posts
- 3
- Saab(s)
- 9-5, 9-3, 99, 96
The first cylinder injection wire was not in fully. So when I was driving the car sounded like subaru but without torgue. No it sounds like a saab and runs good
Thanks for help