Results 1 to 10 of 19
-
06 March 2013 #1
Sebastian Vecchi Teenage Mechanic
- Join Date
- 23 Feb 2013
- Location
- Norther Vermont
- Posts
- 84
- Saab(s)
- 2001 Saab 9-5 Wagon (Turbo)
Rim troubles yay!
It was brought up to me by one of the lovely moderaters of this site (which will remain unnamed) that the new rims I have purchased are 5 x 114 with a 35mm offset. The stock rims are 5x110 with a 49mm offset. That a whole 27mm difference! I am freaking out now that I got the wrong rims! Can someone help me out? What can I do to fix this?!
Edit: Should I buy wheel spacers? If so would 1" be enough?Last edited by svecchi; 06 March 2013 at 04:19.
If its broken, I can fix it. If it already works, I can break it.
-
06 March 2013 #2
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
I think you can fit 5x108 or 5x112 using wobble bolts but 5x114 is too much out of spec. Together with the 35mm offset, your best bet is to try to sell these and get some wheels with he correct specifications for the 9-5.
-
06 March 2013 #3
Sebastian Vecchi Teenage Mechanic
- Join Date
- 23 Feb 2013
- Location
- Norther Vermont
- Posts
- 84
- Saab(s)
- 2001 Saab 9-5 Wagon (Turbo)
Are wheel spacers out of the question?
The reason I ask is that these are used rims already and selling them is going to be hard. If I brought it to my mechanic, could he find a way to get them on?
Edit: Could I use these adapters? http://www.motorcitybolton.com/5x110...adapters.html#Last edited by svecchi; 06 March 2013 at 05:24.
If its broken, I can fix it. If it already works, I can break it.
-
06 March 2013 #4
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
Interesting idea to use something like that. You'll have to make sure the wheel bolts fit and the wheel nuts have the right taper for your wheels. But.. they are 25.4 mm (1") so will bring the wheel offset to 60 mm. And I am not sure what else will be screwed up with the wheel geometry.
-
06 March 2013 #5
Sebastian Vecchi Teenage Mechanic
- Join Date
- 23 Feb 2013
- Location
- Norther Vermont
- Posts
- 84
- Saab(s)
- 2001 Saab 9-5 Wagon (Turbo)
So in fact I need to decrease the offset?
If its broken, I can fix it. If it already works, I can break it.
-
06 March 2013 #6
Jeffrey Master SaabTech/Moderator
- Join Date
- 25 Oct 2010
- Location
- Point Pleasant, PA
- Posts
- 1,316
- Saab(s)
- - 86' 9KT - 95' 9K Custom CS - 06' 9-3 Combi - 07' 9-7X Arc - 08' 9-3 Convertible - 08' 9-3 TurboX -
IMHO - wheel spacers and adapters are a VERY BAD idea. Use the right parts or don't bother. Just my $0.02
European Motor Services, LLC - Point Pleasant, PA 18950 - www.europeanmotorsvc.com
-
06 March 2013 #7
Dave T. Super Moderator
- Join Date
- 03 Aug 2010
- Location
- near Seattle, Washington
- Posts
- 1,515
- Saab(s)
- 1999 9-3SE (2013-2015), 2005 9-3 (2005-2013), 1990 900 (1990-2003)
Before you do anything, check the wheels and see if the offset is stamped on it and what the bolt pattern is. THEN report to us what the numbers and if you're good to go. Ideal is 5 x 110 ET 49
ET 50 is perfect, one from 49 is nothing. 48 is better than 50 but splitting hairs. 5 x 100 will not work. I wonder what car uses that?
Edit: Several GM cars, some Chryslers and Subaru WRX but I didn't check the offset, just saw a post elsewhere about the bolt pattern.
http://www.tiretrends.com/wheel_cata...currencyCode--
This link shows your wheels are made in several sizes, one being 5x100, ET 50Last edited by Dave T; 06 March 2013 at 18:20.
-
06 March 2013 #8
Sebastian Vecchi Teenage Mechanic
- Join Date
- 23 Feb 2013
- Location
- Norther Vermont
- Posts
- 84
- Saab(s)
- 2001 Saab 9-5 Wagon (Turbo)
What I got from looking at the stuff stamped inside the rim is that its 5x100 with 50mm offset. What makes the 49mm offset ideal?
If its broken, I can fix it. If it already works, I can break it.
-
06 March 2013 #9
Dave T. Super Moderator
- Join Date
- 03 Aug 2010
- Location
- near Seattle, Washington
- Posts
- 1,515
- Saab(s)
- 1999 9-3SE (2013-2015), 2005 9-3 (2005-2013), 1990 900 (1990-2003)
Every car has recommended offset. 50 mm is just like 49, the specified offset. No difference..ok, 1 mm. Even a picky person like me will tolerate up to 3 mm off. My 9-3 specifies 41 mm. I use 40 part of the year.
-
06 March 2013 #10
Sebastian Vecchi Teenage Mechanic
- Join Date
- 23 Feb 2013
- Location
- Norther Vermont
- Posts
- 84
- Saab(s)
- 2001 Saab 9-5 Wagon (Turbo)
ooooohhhh, ok i get! Im just gonna put these on craigslist, i found a guy who might trade with me the correct rims
If its broken, I can fix it. If it already works, I can break it.