Results 31 to 40 of 52
-
21 March 2014 #31
- Join Date
- 19 Mar 2014
- Location
- northern,ky
- Posts
- 19
- Saab(s)
- 2007 9-3t
valves
I ordered those valves but I noticed in the book I have to have a timming tool wich I can't find or have the money to buy. Can I do it vishually? I send my head off to be repaired just waiting on valves to come in. Crazy gm ant covering none of these valves. They ripped a lot of people off. Is the cobalts ggoing threw this problem also.
-
22 March 2014 #32
- Join Date
- 01 Jun 2012
- Location
- Long Island, NY USA
- Posts
- 71
- Saab(s)
- 2004 9-3 Arc Convertible, 2008 9-3 2.0T
To do the job the correct (and much easier) way you really should use the tool. There is a post over at saabcentral about a way to do it without the tool but it requires setting it up as you take it apart. The main issue is the Saab setup does not use keys on the cam sprockets so the alignment is easily messed up without the tool.
-
22 March 2014 #33
- Join Date
- 19 Mar 2014
- Location
- northern,ky
- Posts
- 19
- Saab(s)
- 2007 9-3t
-
30 March 2014 #34
- Join Date
- 19 Mar 2014
- Location
- northern,ky
- Posts
- 19
- Saab(s)
- 2007 9-3t
head bolts
-
30 March 2014 #35
Marty Jackson Saab Addict
- Join Date
- 17 May 2013
- Location
- London Ont. Canada
- Posts
- 641
- Saab(s)
- Sadly a Volvo XC90
I reused mine. Next time I wouldn't.
eeurparts.com or thesaabsite.com carry them.
-
30 March 2014 #36
- Join Date
- 19 Mar 2014
- Location
- northern,ky
- Posts
- 19
- Saab(s)
- 2007 9-3t
-
31 March 2014 #37
Marty Jackson Saab Addict
- Join Date
- 17 May 2013
- Location
- London Ont. Canada
- Posts
- 641
- Saab(s)
- Sadly a Volvo XC90
They worked for me and this is round 4 with them. Are they stretched...? Probably. Do they seem to work... So far.
When I did my rebuild I couldn't throw allot of $ at it. So I reused them.
I can change them all individually in the future. (See head bolt re-torking in the tutorial or WIS section on this site.)
What its this timing tool? Are you feeding a new timing chain in? If not you don't need any special tool. You will have to set the valves for sure when you replace them. (Get new valve seals...)
Check the rebuild my 2.3T thread I started. It will show what to do and what not to do...
-
31 March 2014 #38
- Join Date
- 19 Mar 2014
- Location
- northern,ky
- Posts
- 19
- Saab(s)
- 2007 9-3t
bolts
Mine is a 2.0t 2007 saab. I don't have dollars either. Everybill came up at once and I got put in hospitial again so I'm dissabled and can't work so I gotta try to manage off what little money I have left to fix car. I can't find anywhere were they say to rechange headbolts. It don't say to change timming chain neither. Did you reuse your exhaust valves?. My head is being redone at a machine shop. I bought the replacement intake valves and seals came with gasket kit. The part that is getting me is the timming tool. I thought it have marks and it don't. So now I'm stuck on if I just should order head bolts, and a chain and pput it all together and wait till I get the money one day to buy a timming tool. Stinks cause the car I'm driving gets 16mpg and I live in country. I bought this car a month ago and it was supposed to be a map sencer and a good engine and I paid $4500 for car and another $500 to fix a bad intercooler. Now I'm fixing the engine. This problem really needs to be put out there cause I could of warmed my car up and resold it for top dollar and made someone have a really bad day. I love the car the little I drove it. Its just been a complete money loss for me so far and id wanna put it together and not do it right, but yet I don't have the income to do it. This timming tool is really messing with me.
-
07 April 2014 #39
- Join Date
- 19 Mar 2014
- Location
- northern,ky
- Posts
- 19
- Saab(s)
- 2007 9-3t
I got my valves done fixed it. Didn't buy timming tool. So far so good.
-
14 April 2014 #40
Jeffrey Master SaabTech/Moderator
- Join Date
- 25 Oct 2010
- Location
- Point Pleasant, PA
- Posts
- 1,316
- Saab(s)
- - 86' 9KT - 95' 9K Custom CS - 06' 9-3 Combi - 07' 9-7X Arc - 08' 9-3 Convertible - 08' 9-3 TurboX -
So my car broke 2 weeks ago - bent a valve. Lifter broke in 2... 60K Way to go GM. I'll make a thread at some point with pictures. All my parts came in Friday. Head is off and waiting repair now.
European Motor Services, LLC - Point Pleasant, PA 18950 - www.europeanmotorsvc.com