Results 1 to 4 of 4
-
10 April 2013 #1
- Join Date
- 13 Sep 2012
- Location
- isle of wight uk
- Posts
- 5
- Saab(s)
- 93 se t 2001 convertable
Code p1312 & p1334
Good Day to you All
Need a bit of help if possible my saab 93 (2001) keeps bringing up engine light and rader says its codes p1312 & p1334???? i have purchased a new dic fitted it but codes still come up, changed All 4 plug to recomended ones gaped ok,still code comes up if i clear the codes they stay off for a while but come back on and sometimes it clears its self but then comes back on again no lack of power nothing just this dam light
I did have cam shaft sensor error come up with these 2 but got cam shaft sensor changed for new one had no problems but the code for that also comes on with p1312 & p1334???????????
HELP--------FED----------------- UP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
10 April 2013 #2
- Join Date
- 17 Mar 2013
- Location
- Linden, NJ
- Posts
- 17
- Saab(s)
- 1997 9000 CS(sold), 2003 9-3SS, 2001 9-3 Viggen(Sold...then re-bought :D)
try to get the car up to operation temps and see if when you cut the car off and back on if the car becomes more stable at idle and coming off idle. if so i would begin to look at your MAF sensor first...usually where this problem is heard alot about. buy a can of maf cleaner..and spray the contacts and barrel..but only wipe the barrel. if this makes it a bit better then you maf may be on the way out.
-
11 April 2013 #3
Mike Moderator
- Join Date
- 30 Jul 2010
- Location
- Rochester, New York, USA
- Posts
- 1,985
- Saab(s)
- Saab-less
Is the DIC you purchased brand new, or is it a used part? Genuine Saab part?
I would try putting the old DIC on (if you have it) to see if the codes come back.
These codes in combination is normally a DIC issue. It could be that buy by pure bad luck you got another faulty DIC.Free SaabWorld Stickers
"Sometimes it is better to travel than it is to arrive." - Robert Pirsig
-
11 April 2013 #4
- Join Date
- 15 Dec 2012
- Location
- Arlington, VA, USA
- Posts
- 2
- Saab(s)
- '02 9-3 SE
Code p1312 & p1334
You might want to switch out the plugs, while you're at it. I had the same issue, and replaced the DIC and plugs at the same time, which fixed the issue.
Good luck.