Results 1 to 2 of 2
-
28 April 2013 #1
- Join Date
- 28 Apr 2013
- Location
- Ringgold Georgia USA
- Posts
- 1
- Saab(s)
- 2002 9-5 linear
Engine temp sensor/display
I replaced the radiator, thermostat, and engine temp sending unit in my 02 Linear but still have trouble with the temp needle falling off to cold after driving for 10 minutes or so and/or slowly moving up and down as i drive. The check engin light is on (i can reset it but it will come on again if the needle drops again) and the AC compressor will not cycle if that happens. As i understand this is all normal conditions if there is truly a problem with engine temp. I have heard that others have had issues with the harness at J17 but not sure where that is. Any help would be appreciated.
-
16 May 2013 #2
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
What's the code for the CEL? We probably know what it is already but it may be something different.