Results 1 to 4 of 4
-
30 July 2013 #1
ECU programming error
am trying to clone my ecu with an used one from ebay with tech 2. same part number, 5565020.
however, it wasn't successful and these are the error codes. anyone can shed some lights?
cheerios..iJZW Stg 4 | 3" MPPerform DP | Hirsch Dual Catback | KWV2 CO| DEH-P1 | BBK F:8-pot 356 R: 6-pot 330| GS 3-pt Subframe | Saab Aero Bridge Spoiler | Hirsch CF Dashboard | Hirsch Leather Door Handle
-
10 November 2013 #2
- Join Date
- 19 Jun 2012
- Location
- Long Island, New York
- Posts
- 12
- Saab(s)
- 07 9-3, 06 9-5
Had the same problem, can add but cannot SPS update. Had to buy ecu from identical car and just ADD to replace bad T8 ecu.
-
10 November 2013 #3
Jeffrey Master SaabTech/Moderator
- Join Date
- 25 Oct 2010
- Location
- Point Pleasant, PA
- Posts
- 1,316
- Saab(s)
- - 86' 9KT - 95' 9K Custom CS - 06' 9-3 Combi - 07' 9-7X Arc - 08' 9-3 Convertible - 08' 9-3 TurboX -
First off - is this a REAL Tech2? If yes - then I would agree with the comment above. The ECU is not compatible with your car. If it's a China Tech2 then I'd try a real one first.
European Motor Services, LLC - Point Pleasant, PA 18950 - www.europeanmotorsvc.com
-
11 November 2013 #4
- Join Date
- 19 Jun 2012
- Location
- Long Island, New York
- Posts
- 12
- Saab(s)
- 07 9-3, 06 9-5
Yes I was on SAAB tech advisory team, awarded Tech2 after my year. Had plenty of problems with '03 and early '04 conv. T8 ecu's. Now have my own Saab indy shop on Long Island.