Welcome to the world of Saab ! Register
Results 1 to 9 of 9
  1. #1
    Greg McKenzie
    Saab Fan
    Join Date
    01 Jul 2013
    Location
    Victoria Point, Queensland, 4165, Australia
    Posts
    7
    Saab(s)
    1986 Saab 900i, 3 door

    Attention all CIS experts! setting throttle valve bypass

    When you have the bypass in bits and cleaned out what setting do you set the setting screw? Many older cars it was two turns, but iI cannot find a seetting for this.

  2. #2
    Sam Carlson
    Tutorial Bot euromobile900's Avatar
    Join Date
    14 Aug 2010
    Location
    Medford, MA
    Posts
    684
    Saab(s)
    '90 900 LPT with a flat-nose conversion
    What type of engine is this? 8-valve or 16-valve? And what type of injection? K-Jetronic, Lucas CU14, or Bosch LH 2.2?
    Ask me a question about your c900! I promise I either can answer it or know someone who can

  3. #3
    Greg McKenzie
    Saab Fan
    Join Date
    01 Jul 2013
    Location
    Victoria Point, Queensland, 4165, Australia
    Posts
    7
    Saab(s)
    1986 Saab 900i, 3 door
    8valve and Bosch C1

  4. #4
    Greg McKenzie
    Saab Fan
    Join Date
    01 Jul 2013
    Location
    Victoria Point, Queensland, 4165, Australia
    Posts
    7
    Saab(s)
    1986 Saab 900i, 3 door
    I am wondering about this as it is delivering a good spark but wetting the plugs. I tried hotter plugs which were not as wet, but it did not start

  5. #5
    Sam Carlson
    Tutorial Bot euromobile900's Avatar
    Join Date
    14 Aug 2010
    Location
    Medford, MA
    Posts
    684
    Saab(s)
    '90 900 LPT with a flat-nose conversion
    Allright, I changed the name of the thread so maybe we'll attract one of our K-Jetronic (AKA Bosch CI) to answer the question.
    Ask me a question about your c900! I promise I either can answer it or know someone who can

  6. #6
    Renato Piereck
    Spreading the Saab virus rpiereck's Avatar
    Join Date
    24 Jul 2011
    Location
    Ansbach, Germany
    Posts
    1,520
    Saab(s)
    '00 9-5 Aero SC, 87 900i 8v
    I looked through the Saab manual and all I found was a picture showing a clearance for the bottom plate, picture is attached below.

    You can see the entire manual here if it might help: https://docs.google.com/file/d/0B3g0...it?usp=sharing (edit: Starting on page 240 to see instructions on mounting and adjusting the air flow sensor. Page 240-15 has instructions on setting the CO idle screw on the MAF. Page 240-31 has specific instructions on putting the MAF back together after disassembly)

    Here is the Bosch K-Jet book too: https://docs.google.com/file/d/0B3g0...it?usp=sharing


    Name:  maf.jpg
Views: 468
Size:  17.7 KB

    Good luck!
    Last edited by rpiereck; 24 September 2013 at 20:18.
    Now: '00 Saab 9-5 Aero Combi - '89 Peugeot 205 CTI - '91 Peugeot 309 GTI
    Gone: '87 Saab 900i - '95 Saab 900 SE Turbo

  7. #7
    Greg McKenzie
    Saab Fan
    Join Date
    01 Jul 2013
    Location
    Victoria Point, Queensland, 4165, Australia
    Posts
    7
    Saab(s)
    1986 Saab 900i, 3 door
    Thanks a million for all the info. If I cant get it correct after that, there is something wrong!
    Regards

  8. #8

    Join Date
    26 Dec 2018
    Location
    Sweden
    Posts
    3
    Saab(s)
    Saab 900 OG
    Hi, could you upload the links again. I am trying to set the idle speed on my 900 88 Bosch k-jetronic and all I have is the server manual for Bosch LH jetronic .
    Thanks

    Good luck!

  9. #9
    Frank
    Administrator nordwulf's Avatar
    Join Date
    30 Jul 2010
    Location
    USA - Netherlands
    Posts
    7,901
    Saab(s)
    previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
    darwinland, do you mean the manual links in rpiereck post? Just click the links and you should be able to see the manuals. Or try to right-click on the link and save the manuals on your computer.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 08:27.
Powered by vBulletin® Version 4.2.5
Copyright © 2024 vBulletin Solutions Inc. All rights reserved.