Welcome to the world of Saab ! Register
Results 1 to 2 of 2
  1. #1
    Hear my Saab a comin' nuclear944's Avatar
    Join Date
    19 Dec 2010
    Location
    Bulgaria - Eastern Europe
    Posts
    95
    Saab(s)
    Past: 1989 SPG & 1989 900 N/A Sedan

    Brake Light switch fix-all C900's

    The brake light switch has a "ratchet cylinder" on the plunger which very often collapses, making the switch close the circuit permanently and making adjustment difficult to impossible. This tutorial explains how to fix this problem once and for all.

    Difficulty:2/10

    Parts needed: brake switch and super glue

    Tools: 13mm wrench and socket, tiny screwdriver/feeler gauge/ sharp knife, glue, wd-40 or any mild lubricant

    Time: 15 minutes

    The brake switch is located on an assembly just next to the steering column shaft. If you crawl underneath the dash with a flashlight, it's easily visible, regardless of whether your 900 is equipped with the large or small knee bolster. The function of this switch is to close the circuit for the brake lights whenever the brake pedal is depressed. It's spring loaded an works opposite of a push button switch.
    If the plunger on yours has collapsed, your brake lights will be on all the time.
    The removal is straightforward. Undo the the bolt holding the switch assembly in place and undo the connectors. If you have cruise control, there will be other switches which needn't be touched. Use pliers to compress the neck of the switch and pull it out.

    Now you end up with something like this:

    Name:  dsc002_resize-1.jpg
Views: 2342
Size:  35.8 KB

    This is what it looks like when the plunger has collapsed.

    Now using your sharp tool, remove the guts of the switch:

    Name:  dsc003_resize-1.jpg
Views: 2353
Size:  29.6 KB

    Name:  dsc004_resize-1.jpg
Views: 2272
Size:  37.9 KB

    Name:  dsc005_resize-2.jpg
Views: 2268
Size:  29.6 KB

    You don't need to do anything to this part, other than maybe adding some sort of lubricant to the moving parts.

    Now remove the plunger from it's cylinder:

    Name:  dsc006_resize-1.jpg
Views: 2284
Size:  36.7 KB

    You can see the silly ratcheting mechanism which we will now glue permanently. This causes the plunger to collapse when it's pushed backwards and causes the brake pedal plate to lose contact with it.

    Extend the plunger until it looks like this:

    Name:  dsc008_resize-3.jpg
Views: 2275
Size:  34.6 KB

    Obviously, you shouldn't use elmer's glue, but any super glue will do:

    Name:  dsc009_resize-3.jpg
Views: 2243
Size:  32.1 KB

    Let dry.
    Make sure the plunger is smooth and that blobs of dried glue will not interfere with its movement in the cylinder.

    Put the plunger back, making sure the small pin is facing up:

    Name:  dsc010_resize.jpg
Views: 2248
Size:  23.8 KB

    Carefully press the assembly back inside the casing (if you break the casing during removal you can add a drop of glue to secure it back):

    Name:  dsc011_resize.jpg
Views: 2246
Size:  29.2 KB

    Name:  dsc012_resize-1.jpg
Views: 2232
Size:  24.6 KB

    When properly extended, the switch should look like this:

    Name:  dsc001_resize-2.jpg
Views: 2214
Size:  33.4 KB

    Now you can put the switch back in its bracket and readjust the bracket using the 13mm nut. There is a tiny amount of freeplay in the brake pedal assembly designed to allow the switch to operate. Make sure the pedal presses the switch enough when released to allow the switch to work properly.

    Done! Now you'll never have to worry again about a flat battery due to brake lights.

  2. #2
    Michael S. Lucas
    Saab Fan Foreign Object's Avatar
    Join Date
    05 Dec 2011
    Location
    Grand Rapids, Mich.
    Posts
    31
    Saab(s)
    1991 900 SE Turbo Convertible, 2000 Saab 9-5 3.0 Wagon
    I used this repair today-thank you Nuclear944.

 

 

Similar Threads

  1. TOC light, Brake light, Anti-lock brake light, red triangle light on?
    By speccomser in forum Saab 9-5 (1998-2009)
    Replies: 4
    Last Post: 04 August 2022, 23:56
  2. Replies: 16
    Last Post: 03 April 2012, 16:46
  3. Weird Tailight, Reverse Light, Rear Fog Light issue
    By Soar07 in forum Saab 9-3 (2003-2014)
    Replies: 15
    Last Post: 09 January 2012, 21:04
  4. Cannot turn engine off with the ignition switch
    By tommyozzy in forum Saab 9-5 (1998-2009)
    Replies: 4
    Last Post: 02 August 2011, 14:33
  5. 1999 Estate Ignition switch issue
    By frankgue in forum Saab 9-5 (1998-2009)
    Replies: 0
    Last Post: 22 December 2010, 10:09

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 08:25.
Powered by vBulletin® Version 4.2.5
Copyright © 2024 vBulletin Solutions Inc. All rights reserved.