Hi all, just got a 2003 2.0 Turbo vector, convertable and there is a fault with the roof, it will go down on its own, but on its way up the rear flips up and the cover slides back and then roof starts to go up about a 1/4 of the way then stops. it then just starts to slowly sink back down, however if you pull on the front beam to close it and at same time operate the switch it then starts back into life and fully closes and locks.

Any Ideas??

Also the EML light is coming on , showing fault code P0033 think this is turbo waste gate control circuit , i have had a quick look and think maybe the actuator rod is siezing? is this common?

Any advise welcome.