Results 1 to 3 of 3
-
08 April 2014 #1
- Join Date
- 22 Feb 2012
- Location
- Taiwan
- Posts
- 2
- Saab(s)
- 2009 SAAB 9-5
Fuel door lock is not working after replace the battery of remote controller
Hi,
I just replaced the battery of my 2009 saab 95 remote controller.
After replaced it, I just pressed the lock then unlock button one time. Then I can controller driver door ,other doors and trunk.
but I found out the fuel door lock is not working, it was working before I replaced the battery.
Does any one have idea to check the issue?
How can I let the remote controller to do a synchronizing again?
Thanks
Jacky
-
11 April 2014 #2
- Join Date
- 22 Apr 2013
- Location
- Tromsø, 69° 41' N
- Posts
- 464
- Saab(s)
- 2009 9-3 2.0T SC Aero XWD\eLSD. eSID2
Press the remote's unlock button at least 4 times to synchronize the remote with TWICE. After synchronizing, the direction indicators should flash when the remote is operated.
Good luck
-
14 April 2014 #3
- Join Date
- 22 Feb 2012
- Location
- Taiwan
- Posts
- 2
- Saab(s)
- 2009 SAAB 9-5
Hi,
Thanks for helps.
I had found the problem. It was the motor stuck. After I removed the motor and pulled the shaft in and out couple time, then it works again.