Results 1 to 4 of 4
-
16 April 2014 #1
- Join Date
- 16 Apr 2014
- Location
- Luton
- Posts
- 2
- Saab(s)
- Saab 93 1.9 TID vector
Replace fuel filter sensor
Hi,
I have a 1.9 Tid '54 plate 93 Vector. The engine management light has flagged up that there is a problem with the fuel filter sensor. Having looked around I have seen it suggested that it's a fairly straightforward job to change the sensor and have ordered one from Saab. Can somebody please advise on the method to change it?
Thanks in advance
-
16 April 2014 #2
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
Here are the instructions from Saab, hope it helps. Please let us know if you have any tips or share your experience with others. Good luck!
Last edited by nordwulf; 16 April 2014 at 16:24. Reason: updated with file for fuel filter instructions
-
16 April 2014 #3
- Join Date
- 16 Apr 2014
- Location
- Luton
- Posts
- 2
- Saab(s)
- Saab 93 1.9 TID vector
Thank you for this Wulf, it is the Diesel filter sensor however which I need assistance with.
-
16 April 2014 #4
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
Yes.... fuel level sensor and fuel filter sensor are two entirely different things..!
I updated my previous posts with instructions for the fuel filter as there are no instructions in the WIS for just the sensor. Looks like the sensor is just screwed into the fuel filter housing.
Reply With Quote
