Results 1 to 5 of 5
-
14 June 2014 #1
Blower motor, Speed Controller.........?
[FONT=verdana]For the past week when the ACC is in the LO (MAX) mode and all of the bars are showing on the screen the blower seems to be blowing at about half of that.[/FONT]
[FONT=verdana]In fact no matter what setting I have it on , it just seems to not be moving as much air. (Used the LO (MAX) as an example) [/FONT]
[FONT=verdana]Ran the Fault Code test and have a normal 0 on the left.[/FONT]
[FONT=verdana]Interior filter was changed 6 months ago.[/FONT]
[FONT=verdana]Reading through other threads I'm assuming it could be one of three things? Motor (brushes?), ACC Unit or HVAC Fan Speed Controller?[/FONT]
[FONT=verdana]Any tips on narrowing it down or are there other possibilities?[/FONT]
[FONT=verdana]Thanks in advance[/FONT]Last edited by 2socks; 18 June 2014 at 22:46.
-
18 June 2014 #2
Based on the overwhelming response, I have ordered a new blower motor .
-
22 June 2014 #3
Well.......now it's on to the Fan Speed Controller as the new motor is doing the same thing. Spare motor to the garage. :-)
-
01 July 2014 #4
Fan Speed Controller replaced, problem solved. Sensor not the easiest to get at. Recommend removing the gas pedal.
-
01 July 2014 #5
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
Even though you didn't get any assistance from other members here, your updates may help someone else in the future.