Results 1 to 4 of 4
-
30 September 2014 #1
- Join Date
- 27 May 2014
- Location
- sleaford. lincs
- Posts
- 9
- Saab(s)
- 9-5 vector auto estate 2005
remove and replace lambda sensor.
hi.
i recently got the code for faulty lamda sensor appear. 1995 9-5 2ltr turbo vector. are there any special tools required to re move and replace, as i got a decent quote for replacement from gsf car parts of 52-00, using my existing plug.
cheers mike
-
30 September 2014 #2
- Join Date
- 22 Apr 2013
- Location
- Tromsø, 69° 41' N
- Posts
- 464
- Saab(s)
- 2009 9-3 2.0T SC Aero XWD\eLSD. eSID2
As 9-5 was "born" in 1997, are lambda sensor replacement special tools requirement for MY 1995: NIL
MY and code (= front or rear -) would be welcomed for an answer related to your 9-5. Most likely is a stuff for coating of the threads the only "special" requirement.
And: I'd be reluctant to install any sensor not compliant with OEM specifications.
-
30 September 2014 #3
- Join Date
- 27 May 2014
- Location
- sleaford. lincs
- Posts
- 9
- Saab(s)
- 9-5 vector auto estate 2005
sorry guy's... it should read 2005, not 1995.
thanks mike
-
30 September 2014 #4
- Join Date
- 27 May 2014
- Location
- sleaford. lincs
- Posts
- 9
- Saab(s)
- 9-5 vector auto estate 2005
the parts from german, swedish, french have always been good ones, well so far anyway, they also boast a good record of service and the rac recommend them. thanks for the point front or rear i will look into that one.
cheers mike