Results 1 to 3 of 3
-
13 July 2015 #1
- Join Date
- 13 Jul 2015
- Location
- Fort Erie, Ontario Canada
- Posts
- 2
- Saab(s)
- 2009 9-3 Sedan
2009 9-3 Broken Rear Window Regulators
Folks,
I have a 2009 9-3 2.0 Litre Sedan. Both rear window regulators have broken. The motors work fine it's the plastic cable guides that have imploded. I've been searching for replacement parts for 5 months and have been told that these parts are currently not being manufactured by anyone.
Used ones are available however since the issue is that the plastic ages and becomes brittle so it seems kind of stupid to replace with used equipment in this case.
I'm thinking of searching for someone who might be able to replicate the single piece of the regulator that is actually broken, perhaps fabricating it in another material.
What I require is a photo of the piece of the regulator that has broken on my regulators. I've attached a picture of the broken piece of plastic..
Help would be very much appreciated.
-
26 July 2015 #2
Dave Saab Enthusiast
- Join Date
- 25 Oct 2014
- Location
- Nottinghamshire, England
- Posts
- 130
- Saab(s)
- 2001 93 2.0Ltr HOT Aero coupe & 2011 1.9TTiD Aero saloon
Hi
I think I've found you the part numbers.
Window regulator (rear door) R/Hand side 12763707.
Window regulator (rear door) L/Hand side 12763708.
http://saabpartsdistribution.com/par...iagram=7320420
Or these might have something
http://www.dormanproducts.com/Digita...tors2013V1.pdf
http://www.pelicanparts.com/catalog/...pg2.htm#item10
Hope this is of some use
DaveLast edited by Dave 2 93s; 26 July 2015 at 10:14. Reason: trying to remove font info
-
27 July 2015 #3
- Join Date
- 13 Jul 2015
- Location
- Fort Erie, Ontario Canada
- Posts
- 2
- Saab(s)
- 2009 9-3 Sedan
Thanks Dave, unfortunately I've attempted to purchase the part new from sites as you've noted above however there is no stock available from anywhere in North America.
Cheers, Bill