0

Hi, everyone.
Was doing some maintenance on my 04 Aero, had to replace a few vacuum hoses l, and I found that I'd broken some little valve, connecting a hose going to the throttle body and one going into the back of the block, I think.
Here it is:
That's it in the hose. The other end of it is broken off inside the other hose it was connected to.
That's it out of the hose. The staining seems to be from coolant? It's hard to tell, I can't really get a smell off of it.
That's where it came from in the engine bay. Connecting a hose from the throttle body to the back of the engine block.
Any help anyone can give will be greatly appreciated. In a bit of a bind.
Last edited by Rognmoe; 17 August 2015 at 02:08. Reason: Finally got my electronics working together.
Thumbs Up: |   2 |
Breather hose check valve. You should be able to stick it back together with RTV for a few days until you get a new one. For some reason I don't see it on eeuroparts right now, but a few options on eBay.
Sent from my VS920 4G using Tapatalk
Thumbs Up: |   1 |
Saab 9 5 Breather Hose Oil Trap to Throttle Housing Hose Pro Parts 59 55 927 | eBay
one of the sellers on ebay has it.
Thumbs Up: |   0 |
Thumbs Up: |   1 |
it's right here..
des