Results 1 to 1 of 1
-
02 September 2015 #1
- Join Date
- 01 Sep 2015
- Location
- Shetland Isles
- Posts
- 1
- Saab(s)
- 9-3 2.2 tid Vector
Fault code says CPS
Replaced CPS after 2.2 tide refused to start ,fault codes indicated that this was the problem . Engine still not starting after battery charge and general checks , old CPS tests the same as the new one so probably was not the fault !
but fault code generated still says CPS is the culprit what condition should I get on the wiring connecting into CPS and where are they coming from ?