Welcome to the world of Saab ! Register
Results 1 to 3 of 3
  1. #1

    Join Date
    18 Dec 2015
    Location
    Vermont
    Posts
    1
    Saab(s)
    89 900 turbo
    Thumbs Up:   0

    89 900 turbo stuck in reverse

    Recently moved into a new place and the landlord has an old Saab he said I could fix if I wanted it so I figured I'd take a stab at it.

    The car has been sitting for quite a few years and he's very foggy as to what was wrong with it. I found that everything turns on and all the lights light up and the starter will engage but the transmission is stuck in reverse and the clutch has no resistance at all. Not sure if the clutch has anything to do with it not going out of reverse or if it's a linkage problem. Anyone know what the problem might be? Have tried to shift it with the key on.

    0 Not allowed!

  2. #2
    Saab Nut
    Join Date
    06 Mar 2011
    Location
    Westport, Pennsylvania, United States
    Posts
    410
    Saab(s)
    93 9000 CSE, 85 900T
    Thumbs Up:   1
    Try rocking it while in reverse and nudge the shifter?

    0 Not allowed!

  3. #3
    Sam Carlson
    Tutorial Bot euromobile900's Avatar
    Join Date
    14 Aug 2010
    Location
    Medford, MA
    Posts
    683
    Saab(s)
    '90 900 LPT with a flat-nose conversion
    Thumbs Up:   2
    Where in Vermont are you? If you're in the Burlington area, I could stop by and apply my knowledge...

    Even if you are in Waterbury or something, I might be able to stop by on my way through at some point.

    If you can't get it out of reverse by rocking and nudging the shifter, as J.S. Krebs says to do, you could also try investigating a possible malfunction of the shifter reverse lockout, locking you IN to reverse. It's far-fetched, but possible. Or maybe motor mounts. Or (extremely far-fetched) the car, having sat for a few years, is sunk into the ground or corroded up enough that the shifter shaft has seized.

    The way to get your clutch back will probably involve bleeding the system, at least. At most, you will need a new master, slave, and hydraulic hose. If the clutch hydraulics have gone, I would also suspect the brakes of containing dubious hydraulic components.

    0 Not allowed!
    Last edited by euromobile900; 22 December 2015 at 03:14.
    Ask me a question about your c900! I promise I either can answer it or know someone who can

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 16:45.
Powered by vBulletin® Version 4.2.5
Copyright © 2020 vBulletin Solutions Inc. All rights reserved.