Welcome to the world of Saab ! Register
Results 1 to 4 of 4
  1. #1
    Frustrated Tech2 User
    Join Date
    20 Apr 2016
    Location
    Atlanta, GA
    Posts
    2
    Saab(s)
    2006 9-3 2.0T 5-Speed Convertible
    Thumbs Up:   0

    Tech2 in Atlanta? I have one... but need another

    I'm attempting to replace my ECU due to a high/low voltage code (P0687/6) that's keeping me from passing emissions. I have a knock-off Tech2 that has served me well in the past and is not acting up at all, but refuses to connect to tis2000. It's been quite a few years since I used this tool and I no longer have an XP SP3 platform to connect it to. I'm a member on trionictuning and have tried all kinds of VMs with no luck. I have a 2006 9-3 2.0T.

    Anyone in the Atlanta area have a working Tech2 setup -- either tool + computer or just computer -- that I can use to add my new-to-me ECU to my car? It drives with the old ECU, but throws those intermittent codes, which cause other problems such as decreased boost, no AC. (That is, I can drive to you; I don't need to borrow your setup.)

    0 Not allowed!

  2. #2
    Saab Enthusiast
    Join Date
    10 Apr 2014
    Location
    Atlanta
    Posts
    157
    Saab(s)
    2004 9-5 ARC 2.3T wagon
    Thumbs Up:   0

    0 Not allowed!

  3. #3
    Frustrated Tech2 User
    Join Date
    20 Apr 2016
    Location
    Atlanta, GA
    Posts
    2
    Saab(s)
    2006 9-3 2.0T 5-Speed Convertible
    Thumbs Up:   0
    Quote Originally Posted by Pbuck1 View Post
    Thanks!

    0 Not allowed!

  4. #4

    Join Date
    18 Jun 2016
    Location
    Atlanta, GA
    Posts
    1
    Saab(s)
    9-3
    Thumbs Up:   0
    Quote Originally Posted by xtlicious View Post
    I'm attempting to replace my ECU due to a high/low voltage code (P0687/6) that's keeping me from passing emissions. I have a knock-off Tech2 that has served me well in the past and is not acting up at all, but refuses to connect to tis2000. It's been quite a few years since I used this tool and I no longer have an XP SP3 platform to connect it to. I'm a member on trionictuning and have tried all kinds of VMs with no luck. I have a 2006 9-3 2.0T.

    Anyone in the Atlanta area have a working Tech2 setup -- either tool + computer or just computer -- that I can use to add my new-to-me ECU to my car? It drives with the old ECU, but throws those intermittent codes, which cause other problems such as decreased boost, no AC. (That is, I can drive to you; I don't need to borrow your setup.)
    Hey xticious,

    I am looking for someone with a Tech2 tool to help me reprogram a spare key fob I am buying on ebay for a 2004 9-3. Any chance you could help me out?

    0 Not allowed!

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 23:15.
Powered by vBulletin® Version 4.2.5
Copyright © 2022 vBulletin Solutions Inc. All rights reserved.