Results 1 to 4 of 4
-
18 May 2016 #1
- Join Date
- 17 Dec 2013
- Location
- Adelaide, Australia
- Posts
- 48
- Saab(s)
- Aero 95 2001 wagon/estate
Top engine mount
Hi,
Just wondering if there is a tutorial to replace top/ upper engine mount for SAAB 95 2001? the one below the top engine mount bracket.
From what I can see its not too hard but more after sockets sizes to use, tension for tightening nut etc
thanks
Clayton
-
06 June 2016 #2
Roger Cook Saab Enthusiast
- Join Date
- 24 Jan 2011
- Location
- Ypsilanti, MI
- Posts
- 201
- Saab(s)
- 2008 9-5 Aero, 2006 9-3SC 2.0T, 2000 Viggen 'vert, SAAB Quantum, 2000 9-5 retired at 318K miles
Socket sizes: what ever fits correctly.
Torque values: the large nut that secures the aluminum yoke is 80 ft-lbs. I belive the three bolts that secure the mount to the fender are 45 ft-lbs (same as the four yoke bolts to engine block), but it has been a long time since I changed this part
-
07 June 2016 #3
- Join Date
- 17 Dec 2013
- Location
- Adelaide, Australia
- Posts
- 48
- Saab(s)
- Aero 95 2001 wagon/estate
Great thanks,
much appreciated
Clayton
-
07 June 2016 #4
Desmond Khoo Saab Enthusiast
- Join Date
- 24 Mar 2012
- Location
- Malaysia, Kuala Lumpur
- Posts
- 152
- Saab(s)
- 2006 9-5 2.0t
i just changed mine 2 weekends ago.
Socket sizes are 18, 16, 13 and 10 if i recall correctly.
loads of tutorials online. i followed the trionic seven tutorial
des