Results 1 to 3 of 3
-
06 June 2016 #1
- Join Date
- 17 Dec 2013
- Location
- Adelaide, Australia
- Posts
- 48
- Saab(s)
- Aero 95 2001 wagon/estate
Coolent sensor
Hi,
My ECU on my 95 aero 2001 is showing fault codes for P0116 and one for P1334. I think the P1334 I need to replace the DI Cassette as I did the sparkplugs before xmas ( car is running fine though).
For the P0116 I believe the coolant sensor needs replacing , is there a link on how and what to do to replace it?
My temp gauge has been playing up for the last few months. Often when I first drive the car the gauge does not move, but if I stop and start again the gauge moves to where it should be.
Thanks
Clayton
-
06 June 2016 #2
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
That should be easy. Just drain some coolant and replace the sensor. Location can be found here in the thermostat replacement instructions: http://saabworld.net/showthread.php?...ull=1#post4444
It sounds like you also may have to replace the thermostat. It's an inexpensive part but a bit more work.
-
07 June 2016 #3
- Join Date
- 17 Dec 2013
- Location
- Adelaide, Australia
- Posts
- 48
- Saab(s)
- Aero 95 2001 wagon/estate
Thanks , much appreciated
Clayton