Results 1 to 3 of 3
-
30 July 2016 #1Saab Fan
- Join Date
- 28 Oct 2013
- Location
- alabama
- Posts
- 9
- Saab(s)
- 1999 95se gone and 2006 9-5
pcv trap removal
My06 9-5 2.3 is getting all pcv parts changed. The trap is loose but can't get it from behind the engine. Any tips?? Thanks
-
30 July 2016 #2Saab Fan
- Join Date
- 20 May 2016
- Location
- Mid-West
- Posts
- 37
- Saab(s)
- 02 9-5 Wagon 2.3t Auto
Are you doing it from under the car? You need to remove the intake manifold brace. Then there's just one bolt I think. Might be two. Can't remember.
-
30 July 2016 #3Saab Fan
- Join Date
- 28 Oct 2013
- Location
- alabama
- Posts
- 9
- Saab(s)
- 1999 95se gone and 2006 9-5
Thanks for the reply. The tank was loose but to large to get it out from behind the engine. A/C hard lines on the passenger side in the way or it would come out. My06 9-5 2.3 has a larger tank than the one I put on my old my99 upgrade. reinstalled for now. New aftermarket lines have bad ck valves, got to reorder. Thanks
Reply With Quote
