Welcome to the world of Saab ! Register
Results 1 to 4 of 4
  1. #1
    Saab Nut Digger's Avatar
    Join Date
    28 Oct 2016
    Location
    Minneapolis Minnesota
    Posts
    265
    Saab(s)
    2006 9-3 Wagon
    Thumbs Up:   61

    Tech 2 security access error 3322

    So I got the Tech 2, the Saab TIS 2000 software and I get half way into security access and get a 3322, so I've reloaded Windows XP on my Dell D620 and read everything I can find on solving this error and I'm no farther along than I was 3 days ago.

    Everything appears to work, I select security access and the T2 changes from Tech 2 display, looks like it is doing what it needs to do to get security and then I get the error 3322. Have changed COMM port settings, T2 and Dongle, even added newer JAVA, still a no go.


    Any suggestions

    0 Not allowed!

  2. #2

    Join Date
    19 Feb 2017
    Location
    Roanoke
    Posts
    3
    Saab(s)
    2000 95 Aero , 2004 93 linear, 1997 900s
    Thumbs Up:   0
    Have you used a working dongle crack for TIS 2000


    Sent from my iPhone using Tapatalk

    0 Not allowed!

  3. #3
    Saab Nut Digger's Avatar
    Join Date
    28 Oct 2016
    Location
    Minneapolis Minnesota
    Posts
    265
    Saab(s)
    2006 9-3 Wagon
    Thumbs Up:   61
    I have a Saab and GM dongle crack disk, two dongles that look identical from two different suppliers and both do the same thing. Haven't found a working no dongle required dongle crack. Some of the crack downloads came with a lot of malware attached and every non working thing I've slipped into sys32 has blown out the windows.

    Have reloaded XP so many times I think Microsoft changed their update page address to get rid of me and I have gone as far as digging out the old data line monitor and slipped it in at the 9pin serial port to see what's happening in the bitstreem, the PC and the Tech 2 don't have any trouble talking to each other. I know 4 different ways to install the dongle and what goes out over the LAN when you register the key with the system, FYI "DON"T TRY THAT", the laptop wyfi can find the line when the cable isn't plugged in and what comes back will cost half a day.

    The changing error codes tell me that the program knows when the dongle is and isn't installed, and when the CANDI is and isn't hooked to the car and if the key is on or not.

    With so many conflicting setup instructions on the web and the 4 sentence instructions that came with the TIS disk and dongle, this has been kind of like playing a video game where you spend 4 hours in front of the computer helping your little guy get back up after he's been crushed. I've even tried replacing the flat ribbon between the PC and Tech 2 with CAT 5 cable, made no difference at all and that's just a wild ----- guess.

    At this point all suggestions are appreciated.

    I'm ready to give it another try in the morning and this time I will be using the AC power adaptor so I don't loose power to the Tech 2 when I turn the key off, with the key off and the Tech 2 unplugged from the diagnostic port the TECH 2 looses power and it maybe it forgets something it needs to remember.

    0 Not allowed!

  4. #4
    Saab Nut Digger's Avatar
    Join Date
    28 Oct 2016
    Location
    Minneapolis Minnesota
    Posts
    265
    Saab(s)
    2006 9-3 Wagon
    Thumbs Up:   61
    After a month of chasing, found the problem. Dongle driver conflict with Dell laptop docking station parallel port.

    0 Not allowed!

 

 

Similar Threads

  1. 2009 93 XWD Remote Access & Electrical Problems
    By AlRusk63 in forum Saab 9-3 (2003-2014)
    Replies: 1
    Last Post: 30 November 2015, 08:55
  2. Replies: 14
    Last Post: 20 August 2014, 12:41
  3. Security system and the remote key problem
    By acuboost in forum Saab 9-3 (2003-2014)
    Replies: 9
    Last Post: 03 June 2014, 22:19
  4. Error 500 - Internal server error
    By SaabKen in forum Administration
    Replies: 5
    Last Post: 18 August 2010, 14:56

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 15:51.
Powered by vBulletin® Version 4.2.5
Copyright © 2017 vBulletin Solutions Inc. All rights reserved.