Results 1 to 6 of 6
-
08 April 2017 #1
- Join Date
- 08 Apr 2017
- Location
- Denmark
- Posts
- 5
- Saab(s)
- 9-5 Aero
Saab 9-5 aero misfire only at idle.
Hi saab people.
I have a 9-5 aero estate 01. my problem is i get random misfire in idle only 800-1200, i get in 60 secounds, 60 misfires but i have misfires on all of them. some more then other and different witch one is the one with most misfire.
example on 60 secs record.
cylinder 1: 4 misfires.
cylinder 2: 7 misfires.
cylinder 3: 54 misfires
cylinder 4: 37 misfires
if i then wait 1 hour, deletes DTC, and the record for misfires, then it could like like this.
Cylinder 1: 12 misfires
cylinder 2: 55 misfires
cylinder 3: 30 misfires
cylinder 4: 8 misfires
When the car runs on normal drive 20-25km run. there is max 3 misfires total as long as it is above 1200 rpm
The car has new plugs, ignition cassette, turbo overhall and rebuild, chainkit, valve lifters, valves, cylinder head gasket, intlet gasket, exhaust gasket, PCV system include the one way valve, throttlebody is not that old max 15.000km done, new oil pump, pan has been cleaned.
I am wondering if the vacum hoses could be the problem?, also one of the new lifters is noisy but i dont think that should be my problem.
all kind of help is welcome, thanks you!
-
08 April 2017 #2
- Join Date
- 08 Apr 2017
- Location
- Denmark
- Posts
- 5
- Saab(s)
- 9-5 Aero
all injectors has been tested at pro center on different kind of duty cycle,
other cassette has been tryed with out luck.
i have plugged an AFR sensor in the back of the exhaust and it says 18:1 in idle, also the plugs are totally White / gray.
-
09 April 2017 #3
Bruno Saab Addict
- Join Date
- 18 Nov 2016
- Location
- Cheeseland or TICTAC land
- Posts
- 603
- Saab(s)
- 9-5 ARC Wagon 2002 2 t auto engine B205E
not wrong type of plugs ?
-
09 April 2017 #4
- Join Date
- 08 Apr 2017
- Location
- Denmark
- Posts
- 5
- Saab(s)
- 9-5 Aero
Hi mate. No they are the ones WIS tells me the use, and they are new.
Thanks for asking.
Fail codes are P1300 and P1304,
Tech 2 tells me a fuel pressure on 2,5 bar in idle. im wondering if i should try to measure it manually with a barometer at the fuel rail, as WIS tells 3 bars. there is nothing to fell on hard accelrations as stumble or misfires on Tech 2.
also i am at the momment resealed all O-rings at the inletmanifold, as to the fuel regulator, and to the sensor at the firewall ?, also i have replaced the socket to the brake booster (mine is with Automatic gear) and then i replace the new gasket to the inlet manifold with a new one Again.
-
10 April 2017 #5
- Join Date
- 19 Jul 2015
- Location
- Charlottesville, VA
- Posts
- 218
- Saab(s)
- 1997 NG 900 SE
Here's another thing to try that was helpful for me. If you are currently using spec plugs, NGK PFR6H-10, try switching to copper plugs, NGK BCPR6ES-11, or a cooler plug, BCPR7ES-11, or what I've found works great for me, BCPR7ES. The 10 and 11 refer to the pre-set gaps of 1mm and 1.1mm. The BCPR7ES has a pre-set gap of .9mm. My car, which is a 2004 ARC with 235L engine, misfired noticably occasionally under acceleration until I switched plugs. Not saying that it will work for you, but since Trionic can be very sensitive to its ignition components, it may be worth it to experiment. Tuned cars normally run cooler plugs than spec, and turbo cars in general like a somewhat smaller gap. Doesn't take as much voltage for the spark.
Anyway, just some options to try that are easy and cheaper than the alternatives.
-
16 April 2017 #6
- Join Date
- 08 Apr 2017
- Location
- Denmark
- Posts
- 5
- Saab(s)
- 9-5 Aero
Hi. Yeaah could be a try worth. ive bought a new fuel filter also, and i am waiting for parts from local saab dealer..
Similar Threads
-
'04 SAAB 9-3 Aero 2.0T EML and misfire.
By chalpkin in forum Saab 9-3 (2003-2014)Replies: 2Last Post: 20 February 2017, 22:03 -
2000 Saab 9-5 Aero Hang Idle When Clutch In
By JunkOwner in forum Saab 9-5 (1998-2009)Replies: 1Last Post: 03 December 2016, 20:53 -
2007 9-3 aero rough idle and stall
By Canada_Saab in forum Saab 9-3 (2003-2014)Replies: 9Last Post: 13 November 2016, 04:43 -
Misfire CEL Coils ISSUES 07 Aero V6 2.8L
By Stephanie in forum Saab 9-3 (2003-2014)Replies: 1Last Post: 20 April 2015, 13:11 -
Saab 9-5 2.3t B235 engine misfire
By EMH2015 in forum Saab 9-5 (1998-2009)Replies: 26Last Post: 15 November 2014, 20:00