Results 1 to 10 of 11
-
20 April 2017 #1
- Join Date
- 07 Jun 2013
- Location
- Wausau, WI
- Posts
- 192
- Saab(s)
- 2006 Saab 9-5, 2004 Saab 9-5 Aero; 2002 9-3 HOT Hatch
2006 9-5 Seat Belt dinging when buckled in
GA SW,
The seat belt reminder ding, keep dinging when I'm buckled in, Drivers side.
Does anyone know how to fix this?
Thanks,
Mario
-
20 April 2017 #2
- Join Date
- 28 Oct 2016
- Location
- Minneapolis Minnesota
- Posts
- 1,136
- Saab(s)
- 2006 9-3 2.0t SportCombi
One of two things and more than likely it's the connector on the seat belt buckle than it is the body control module lost it's mind.
Check your plug end and give the buckle a shot of contact cleaner.
-
20 April 2017 #3
- Join Date
- 07 Jun 2013
- Location
- Wausau, WI
- Posts
- 192
- Saab(s)
- 2006 Saab 9-5, 2004 Saab 9-5 Aero; 2002 9-3 HOT Hatch
@Digger,
Thank you Bro, you're a life saver. Ill report back in a few days. Decided to leave audio stuff alone for now.
-
20 April 2017 #4
- Join Date
- 10 Apr 2017
- Location
- Denham, England
- Posts
- 541
- Saab(s)
- 2011 2.0 9-5 Aero
The original 9-5 doesn't have a "Body control module" it has DICE (Dashboard Integrated Central Electronics) and TWICE (Theft Warning Integrated Central Electronics). The drivers seat does not have an "Occupied" switch so that leaves the buckle switch. This has already been identified as the likely cause but I am not convinced that a shot of switch cleaner is the answer. I would consider locating a replacement buckle assembly.
-
20 April 2017 #5
- Join Date
- 07 Jun 2013
- Location
- Wausau, WI
- Posts
- 192
- Saab(s)
- 2006 Saab 9-5, 2004 Saab 9-5 Aero; 2002 9-3 HOT Hatch
@GeoffR
Your input is appreciated, do you have a link for aforementioned buckle assembly?
EDIT: Does an 06' count as an original 9-5?
-
20 April 2017 #6
- Join Date
- 10 Apr 2017
- Location
- Denham, England
- Posts
- 541
- Saab(s)
- 2011 2.0 9-5 Aero
Yes, the "Original 9-5" is 1997 to 2009, the NG is 2010 onwards.
Part number is shown as 52 03 229 https://www.esaabparts.com/saab/parts/5203229
-
20 April 2017 #7
- Join Date
- 07 Jun 2013
- Location
- Wausau, WI
- Posts
- 192
- Saab(s)
- 2006 Saab 9-5, 2004 Saab 9-5 Aero; 2002 9-3 HOT Hatch
Thank you very much Sir!
-
20 April 2017 #8
- Join Date
- 10 Apr 2017
- Location
- Denham, England
- Posts
- 541
- Saab(s)
- 2011 2.0 9-5 Aero
No problem, I have a copy of EPC so it takes but a few seconds.
-
02 May 2017 #9
- Join Date
- 07 Jun 2013
- Location
- Wausau, WI
- Posts
- 192
- Saab(s)
- 2006 Saab 9-5, 2004 Saab 9-5 Aero; 2002 9-3 HOT Hatch
Does anyone have a link to the seat removal?
Or can I not remove the seat and change it out all ninja like?
-
02 May 2017 #10
- Join Date
- 10 Apr 2017
- Location
- Denham, England
- Posts
- 541
- Saab(s)
- 2011 2.0 9-5 Aero
Move the seat fully forward, remove the two bolts at the back of the seat tracks.
move the seat fully back, remove the front bolts, tip the seat and disconnect the plugs, cut the cable ties as required.
Reassembly is the reverse.
That is how it was done on the 900 back in 1987 and it hasn't changed, I did look it up in WIS but it is on a different computer.
Similar Threads
-
convertible SEAT BELT issue
By MAXXXIMUS in forum Saab 900 and 9-3 (1994-2003)Replies: 5Last Post: 29 November 2018, 22:34 -
Seat Belt and Workshop manual
By DonaldEC in forum Saab 900 and 9-3 (1994-2003)Replies: 5Last Post: 19 February 2015, 05:43 -
Rear seat belt not retracting?
By toxicavenger in forum Saab 9-5 (1998-2009)Replies: 8Last Post: 11 November 2013, 21:08 -
Flickering seat belt light...
By rpiereck in forum Saab 900 (1979-1994)Replies: 1Last Post: 25 January 2013, 21:38 -
Passenger seat belt warning light @ SID
By littlebeetle in forum Saab 9-3 (2003-2014)Replies: 2Last Post: 10 December 2010, 02:05