Results 1 to 1 of 1
-
29 April 2017 #1
- Join Date
- 02 Sep 2014
- Location
- USA Kansas
- Posts
- 1
- Saab(s)
- 2000 95
3.0l cam shaft's
Need some help...had a shop do vavle job on my heads and they put the caps and cams in the wrong location. The cams do not have part number all they have is GM casting numbers on them. The numbers are R90400057 with each one having an additional number as follows.....GC 20, GC 21x2 and GC 22. Does anyone have a V6 with these numbers and location.
Similar Threads
-
Cam Shaft Sensor Code Issue
By TopDrop9-3S01 in forum Saab 900 and 9-3 (1994-2003)Replies: 3Last Post: 04 May 2015, 04:08 -
Drive Shaft / Axle Seal Question
By photousa in forum Saab 9-5 (1998-2009)Replies: 2Last Post: 17 February 2014, 01:52 -
Leaking axle shaft seal?
By 95Aero in forum Saab 9-5 (1998-2009)Replies: 5Last Post: 29 September 2013, 21:59 -
CV JOINT (HALF-SHAFT)
By inergen in forum Saab 9-3 (2003-2014)Replies: 0Last Post: 06 October 2012, 00:06 -
Balance shaft seizure
By cammo in forum Saab 9-5 (1998-2009)Replies: 5Last Post: 20 July 2012, 14:30