Welcome to the world of Saab ! Register
Results 1 to 4 of 4
  1. #1

    Join Date
    14 May 2017
    Location
    Lancashire
    Posts
    2
    Saab(s)
    9-3 linear convertible
    Thumbs Up:   0

    Saab 9-3 roof not working

    Plugged scanner in and get fault codes b1310-06 soft top closed position sensor circuit short to b+ and every time I set off it tells me to remove obstacles from boot any ideas welcome

    0 Not allowed!

  2. #2
    Saab Owner Digger's Avatar
    Join Date
    28 Oct 2016
    Location
    Minneapolis Minnesota
    Posts
    381
    Saab(s)
    2006 9-3 SportCombi
    Thumbs Up:   83
    If you have an owners manual look up manual top operation, hand cycle until you can get to the offending sensor and go from there. All basic electrical troubleshooting to eliminate switches and wires, no silver bullet for power tops.

    0 Not allowed!

  3. #3

    Join Date
    14 May 2017
    Location
    Lancashire
    Posts
    2
    Saab(s)
    9-3 linear convertible
    Thumbs Up:   0
    Quote Originally Posted by Digger View Post
    If you have an owners manual look up manual top operation, hand cycle until you can get to the offending sensor and go from there. All basic electrical troubleshooting to eliminate switches and wires, no silver bullet for power tops.
    Every time I set off it flags up soft top blocked clear obstacles any idea where I would locate that sensor cheers andy

    0 Not allowed!

  4. #4
    Saab Owner Digger's Avatar
    Join Date
    28 Oct 2016
    Location
    Minneapolis Minnesota
    Posts
    381
    Saab(s)
    2006 9-3 SportCombi
    Thumbs Up:   83
    Remove obstacles from boot means the system thinks there is something in the hood storage area and that means taking a look and checking inside the boot for something pushing into the hood storage area. If the boot is empty the sensor and wiring you need to check is inside the hood storage area.

    In the WIS b1310-01 is the soft top closed position sensor circuit short to b+ and -06 is soft top closed position sensor circuit open/short to ground and the position sensor is on the right hand main hydraulic cylinder. The system needs to believe the boot is closed and latched and 10 different sensors need to answer the top module before anything happens.

    You really should have the Hood System section of the WIS with its detailed operation, along with wire paths, voltages, locations and that is way to many pages and pictures to attach.

    0 Not allowed!

 

 

Similar Threads

  1. Saab 9-5 roof GPS/mobile antenna replacement (WIS)
    By SaabWorld in forum Tutorials, repairs and service
    Replies: 12
    Last Post: 01 May 2017, 23:54
  2. Saab roof bars Thule?
    By marksantjennings in forum Saab 9-5 (1998-2009)
    Replies: 0
    Last Post: 05 April 2016, 17:36
  3. Saab 93 (2005) Roof issue
    By James Owen in forum Saab 9-3 (2003-2014)
    Replies: 2
    Last Post: 15 August 2013, 18:23
  4. 1998 Convertible roof/hood not working what so ever...
    By jamesforster91 in forum Saab 900 and 9-3 (1994-2003)
    Replies: 4
    Last Post: 10 June 2013, 19:25
  5. Replies: 0
    Last Post: 09 May 2011, 13:38

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 21:54.
Powered by vBulletin® Version 4.2.5
Copyright © 2017 vBulletin Solutions Inc. All rights reserved.