Results 1 to 4 of 4
-
01 October 2017 #1
- Join Date
- 07 Jun 2013
- Location
- Wausau, WI
- Posts
- 192
- Saab(s)
- 2006 Saab 9-5, 2004 Saab 9-5 Aero; 2002 9-3 HOT Hatch
TD-04 Stainless Steel Line Install Help Request
GE SW,
I purchased this for my TD-04:
http://www.ebay.com/itm/Oil-Water-Li...72.m2749.l2649
Does anyone know how this is supposed to look when its installed, or have a link to a guide/video?
It's kicking my a$$, spent a few hours on it already.
Thanks,
Mario
-
01 October 2017 #2
Bruno Saab Addict
- Join Date
- 18 Nov 2016
- Location
- Cheeseland or TICTAC land
- Posts
- 603
- Saab(s)
- 9-5 ARC Wagon 2002 2 t auto engine B205E
-
01 October 2017 #3
- Join Date
- 01 Oct 2017
- Posts
- 4
- Saab(s)
- 1999 9-3 vert stage 4
Can’t say I’ve ever done it but I just did a td04 swap on mine and the lines are by far the hardest part. You’ll need something to hold the lines back with, since they’re not pre-bent. Could look like a mess if they’re too short.
Sent from my iPhone using Tapatalk
-
02 October 2017 #4
- Join Date
- 07 Jun 2013
- Location
- Wausau, WI
- Posts
- 192
- Saab(s)
- 2006 Saab 9-5, 2004 Saab 9-5 Aero; 2002 9-3 HOT Hatch
Ok, I took some pics, this housing is a 19T, I have to revert back to a 15T, but this will give an idea of what I was asking.
If anyone knows how to do this better, please chime in! I forgot to grab one of the coolant fitting on top. I'll try to grab that tom.
Similar Threads
-
Saab WIS Request
By photousa in forum Saab 9-5 (1998-2009)Replies: 3Last Post: 31 December 2013, 01:02 -
2002 9-3 2.0 SE HOT Info request
By Kazamario in forum Saab 900 and 9-3 (1994-2003)Replies: 5Last Post: 03 July 2013, 16:43