P1000 & P1300 Fault Codes

[louie_louie_67]

These two codes come in when quickly accelerating and reach/exceed 40 mph.

P1000 - Powertrain
P1300 - Cylinder misfire

It seems to me that these could be caused by bad spark plugs and/or bad/loose coil wires.

Anyone else care to chime in? I'd appreciate your help!

Sent from my SM-G935P using Tapatalk

[swisssaabist]

P 1000 doesn't exist on WIS maybe P0100 ?? and P1300 could be a catalyst clogged you can verify that with a tech II
P0100 is related with airmass sensor MAF.

[louie_louie_67]

P 1000 doesn't exist on WIS maybe P0100 ?? and P1300 could be a catalyst clogged you can verify that with a tech II
P0100 is related with airmass sensor MAF.

I annotated the wrong codes. Sorry, swisssaabist!

The correct codes are:
P1300 - Powertrain
P0300 - Cylinder Misfire

My SAAB shudders when driving at higher speeds and sometimes vibrates when idling after driving for about 10 minutes.

I think that this might be due to a bad coil pack and/or spark plug on at a least one of the cylinders.

Also, I don't have ready access to my friend's Tech 2.

Sent from my SM-G935P using Tapatalk

[Digger]

With these codes the WIS tells you to change the sparkplugs and check the hose connect from turbo to throttle body, and the fuel pressure regulator vacuum line.

[louie_louie_67]

Gotcha. Thanks, Digger!

Sent from my SM-G935P using Tapatalk