Results 1 to 2 of 2
-
18 January 2020 #1
- Join Date
- 18 Jan 2020
- Location
- West Sussex
- Posts
- 1
- Saab(s)
- 95 aero
Broken housing for hose assembly
I tried fitting a new hose assembly today but the awkward clip at the bottom end of the old hose has broken off along with the plastic connector it attaches to. Any ideas how to fix this? I think it attaches to the PCV crank case, so it’s the connector in this that has broken.
This is the part I tried to fit:
https://www.partsforsaabs.com/produc...e2863c1174be58
Here are some photos:
https://ibb.co/QK4YRPL
https://ibb.co/ZGVYfQQ
https://ibb.co/8m5GZNF
-
20 January 2020 #2
- Join Date
- 13 Jun 2019
- Location
- Colorado
- Posts
- 112
- Saab(s)
- 1999 9-5 wagon
The metal part at the end of the hose from partsforsaabs.com replaces the white plastic part in your 3rd picture. I could be wrong but that looks like it is the pcv valve itself which is what is cracked on your car. When I did mine, I replaced all of the hoses so it was easy to slide the new valve into the hose ends.
Similar Threads
-
Broken Hose
By RyPilot1 in forum Saab 900 and 9-3 (1994-2003)Replies: 3Last Post: 05 December 2019, 17:39 -
Cracked transmission housing (torque converter end housing endplate)
By todd__young in forum Saab 9-5 (1998-2009)Replies: 0Last Post: 04 February 2019, 05:38 -
oil cooler housing
By Kmdone in forum Saab 9-3 (2003-2014)Replies: 0Last Post: 01 March 2018, 22:08 -
Need help to indentify hose. Hose connects from under check valve to underneath
By CJ Brown in forum Saab 900 and 9-3 (1994-2003)Replies: 3Last Post: 17 November 2015, 14:55 -
Missing Vac Hose ? / Broken Vac Connector
By percy in forum Saab 9-5 (1998-2009)Replies: 8Last Post: 01 August 2014, 00:57