Saab 9-3 solenoids lock up? Part numbers

[futbol90x]

Hello I recently got code p0741 and p0700.

I would like to replace all my solenoids do you guys happen to have the part numbers ? I have 2007 saab 9-3 aero auto

[swisssaabist]

Some here have ordered Rostra ones for cheaper prices than OEM ones with all reliability required http://www.ebay.com/bhp/aw55-50-solenoid

[futbol90x]

Some here have ordered Rostra ones for cheaper prices than OEM ones with all reliability required http://www.ebay.com/bhp/aw55-50-solenoid

Some one link this to me https://rover.ebay.com/rover/0/0/0?m...2F200943301374 it has 6 of them

[Digger]

Some one link this to me https://rover.ebay.com/rover/0/0/0?m...2F200943301374 it has 6 of them

Which tranny are you looking to get parts for? The same kind as you have in your profile listed 2005 9-3 2.0t, or does your 2007 have a v6 with a 6 speed?

[futbol90x]

Which tranny are you looking to get parts for? The same kind as you have in your profile listed 2005 9-3 2.0t, or does your 2007 have a v6 with a 6 speed?

I have two saabs but I need it for 2007 saab 9-3 aero auto

[Digger]

Still don't know if your 07 is a 5 or 6 speed auto, assuming both your Saabs are 5 speed automatics your 07 should have late series solenoids, but still important to check unless you know for sure that it didn't ever get tranny repair with a reman valve body.


Tranny.pdf

[futbol90x]

It’s Six speed and the trans hasn’t been worked on.

[futbol90x]

This what I have Aisin Warner AWTF-80SC (06+ Aero Automatic) Saab 9-3 aero

[Digger]

This what I have Aisin Warner AWTF-80SC (06+ Aero Automatic) Saab 9-3 aero

Whoever sent you the link to six solenoids sent you in the right direction for your 6 speed auto. Pricy little buggers aren't they.

Unlike the 5 speed auto in your 05, you need a tech 2 to check the tranny fluid on this little Saab if you want to get the level right and you will certainly need to have one handy to retrain the TCM if you do this solenoid job.

Before I'd go changing out solenoids for a locking code, I'd give the in and output shaft speed sensors a real good look see at bottom side for metal stuck to the magnet as well as for dirty or bad plug connects up top.

[futbol90x]

Whoever sent you the link to six solenoids sent you in the right direction for your 6 speed auto. Pricy little buggers aren't they.

Unlike the 5 speed auto in your 05, you need a tech 2 to check the tranny fluid on this little Saab if you want to get the level right and you will certainly need to have one handy to retrain the TCM if you do this solenoid job.

Before I'd go changing out solenoids for a locking code, I'd give the in and output shaft speed sensors a real good look see at bottom side for metal stuck to the magnet as well as for dirty or bad plug connects up top.

Okay

Do you have a pdf for service on this ?