Results 1 to 2 of 2
-
17 September 2018 #1
- Join Date
- 17 Sep 2018
- Location
- northants
- Posts
- 1
- Saab(s)
- 9-3 1.9 tid sportwagon
N/S/F CALIPER SEIZING ON ?
Can anybody help and advice?
I have been having the following issues with intermittent juddering at high and low speeds from my 9-3 1.9 TID 58 plate estate.
The near side front wheel was getting so hot that you couldn't touch it. So I thought that the near side front break caliper was seizing on. I have had the front wheels off and checked the breaks, the caliper piston went back with no major problem, so I took the caliper and cleaned up the sliders, copper greased and back together making sure the slider was moving freely.
Since doing this I am only getting break judder at high speeds, I know this is down to break discs being warped. Can anyone advise any thing else other than changing the break pads and break discs as these are cooked, I have read on similar threads it could be the pump? calliper? or even the flexi pipes.
Thanks
Gaz
-
17 September 2018 #2
Similar Threads
-
Brembo Caliper Upgrade for 9-4X
By Tweek's Turbos in forum Saab 9-4X (2011-2012)Replies: 0Last Post: 25 May 2016, 14:59 -
Rear caliper removal?
By mmc in forum Saab 9-3 (2003-2014)Replies: 0Last Post: 20 September 2014, 22:24 -
07 Aero rear caliper issue
By jeffd in forum Saab 9-3 (2003-2014)Replies: 2Last Post: 05 September 2013, 21:49 -
Brake caliper piston seized
By rpiereck in forum Saab 900 (1979-1994)Replies: 6Last Post: 06 August 2013, 08:38 -
has anyone changed a rear brake caliper by themselves?
By tojimario in forum Saab 9-3 (2003-2014)Replies: 16Last Post: 17 March 2011, 01:42