Results 1 to 2 of 2
-
11 October 2018 #1
- Join Date
- 11 Oct 2018
- Location
- Holland
- Posts
- 1
- Saab(s)
- 2003 9-3 Vector
Broke battery tab in wire harness that goes to the starter
I recently bought my son's 2003 9-3 Vector. It has a few issues but the biggest is the copper tab that goes to the starter snapped off when I was removing the starter. The 13mm nut kept spinning so I put a screwdriver behind it to apply some pressure. Next thing I knew, the housing cracked as did the tab that comes out of the wire harness.
My questions are these:
Can I run a separate wire from the battery to the starter? And if so, which side of the battery positive side assembly do I attach to? It looks like there is some kind of circuit breaker there.
Does anything have to be done with the broken terminal end that is still in the wire harness?
-
12 October 2018 #2
Similar Threads
-
Sedan Boot/Trunk Lid Wire Harness Repair - Saab 9-5
By raquettelaker2 in forum Tutorials, repairs and serviceReplies: 1Last Post: 07 May 2022, 17:04 -
Starter motor replacement
By Kangaroo1 in forum Saab 9-5 (1998-2009)Replies: 15Last Post: 16 July 2019, 05:02 -
Wire harness on 9-5 Denso Navigation - what kind?
By nordwulf in forum Tech TalkReplies: 3Last Post: 30 December 2015, 05:16 -
Starter switch?????
By kimosaab in forum Saab 9-5 (1998-2009)Replies: 2Last Post: 22 February 2015, 14:00 -
Wire harness for head unit - 2008 9-3 SC
By djfilthe in forum Saab 9-3 (2003-2014)Replies: 4Last Post: 30 April 2011, 17:46