Results 1 to 5 of 5
-
22 September 2018 #1
- Join Date
- 17 Sep 2018
- Location
- Ireland
- Posts
- 4
- Saab(s)
- 9-3 1.9TTID 180BHP Vector Sports
Crankshaft Gear center bolt torque specs
This came in handy, as my Timing belt jumped and luckily from what we can see no rockers/valve broken or bent. However my Crankshaft Gear center bolt got jammed and we had to grind it off, got new Bolt, Spacer and Gear but need the Torque Tightening Nm/Ft Lb spec for Bolt is not showing on/in WIS (or am i looking in wrong place)..any help you can provide would be great thanks again.
08 9-3 Vector Sport 1.9 TTid 180bhp.
Apologies if in wrong thread as searched everywhere but all i can find is 9-5 spec for 2.2 and 3ltr.Last edited by nordwulf; 01 October 2018 at 16:29. Reason: moved to new thread
-
30 September 2018 #2
- Join Date
- 10 Apr 2017
- Location
- Denham, England
- Posts
- 541
- Saab(s)
- 2011 2.0 9-5 Aero
If you look at any bolt in WIS there should be a link to standard torque values, I haven't got a copy of WIS available at the moment so I can't confirm that. You may need to look at a different model to find what you need.
-
30 September 2018 #3
- Join Date
- 17 Sep 2018
- Location
- Ireland
- Posts
- 4
- Saab(s)
- 9-3 1.9TTID 180BHP Vector Sports
Thanks for this GeoffR, i have a copy of WIS (from op) but link doesn't show torque setting for this, all it says is " " as in my first post all i can find is torque setting for the 9-5.
-
01 October 2018 #4
- Join Date
- 10 Apr 2017
- Location
- Denham, England
- Posts
- 541
- Saab(s)
- 2011 2.0 9-5 Aero
If the setting for the 9-5 is for the same engine, use that.
If the setting for the 9-5 is for a different engine you may be able to find the setting by contacting a specialist of the engine manufacturers products. I am not sure who makes the 1.9 engine, I think it is Fiat, so contact your local Fiat dealer and see if they can help.
-
08 October 2018 #5
- Join Date
- 17 Sep 2018
- Location
- Ireland
- Posts
- 4
- Saab(s)
- 9-3 1.9TTID 180BHP Vector Sports
Similar Threads
-
2001 saab 9-5 se 3.0 turbo head bolt torque and sequence
By Turtlepup2 in forum Saab 9-5 (2010-2012)Replies: 0Last Post: 17 September 2018, 07:31 -
Torque specs for the head bolts
By Lehdood in forum Saab 9-3 (2003-2014)Replies: 7Last Post: 20 November 2014, 18:09 -
Crankshaft bearing clearance specs and a little advice needed.
By ErikB in forum Saab 9-5 (1998-2009)Replies: 3Last Post: 04 November 2013, 16:25 -
Center Console Gear Flex Cover Replacement Part
By percy in forum Saab 9-5 (1998-2009)Replies: 3Last Post: 22 March 2013, 00:09 -
wheel bolt torque specs ?
By Deepblue in forum Saab 9-5 (1998-2009)Replies: 3Last Post: 19 March 2012, 14:13